architecture - engineering - construction
Translite Systems
Translite Systems
Translite Systems - Page 21
Translite Systems
 
The Elements
THE CONDUCTOR
 |
 |
LIANA TRACK The brass alloy conductors are nickel plated. Standard length 6'
(183m). Field cutting must be done with great care to avoid a short circuit. Liana Track
is field bendable. Spans up to 42"(1m) between supports on straight sections. Liana
Track is rated for 300w at 12 volts and 600w at 24 volts |
Bright Nickel |
LT-505-NK |
| MOUNTING HARDWARE |
 |
|
STANDOFF /
CONNECTOR Used to mount Liana Track to a
ceiling. Also can be used as a coupler to join two lengths of track. Mount every 42"
(1m). Drop rod is sold in four standard lengths and is field cuttable. Mounts to ceiling
with one #4 screw. If bending Liana, use standoff at the apex of every curve. |
Bright Nickel |
|
| 4.5" (12cm) drop |
LT-309-NK-4.5 |
| 12" (30cm) drop |
LT-309-NK-12 |
| 16" (40cm) drop |
LT-309-NK-16 |
24" (60cm)
drop |
LT-309-NK-24 |
 |
|
STANDOFF / CONNECTOR - CABLE Used to attach Liana Track to a ceiling. Mount every 42 (1m). 36
(90cm) of aircraft cable is included. Cable is field cuttable. Mounts to ceiling with
single #4 screw. Only use cable mounted Standoff with linear configurations of Liana
Track. |
Bright Nickel |
LT - 31 - NK |
 |
|
SLOPED CEILING MOUNT Used to attach Liana Track to a sloped ceiling. Mount every 42 (1m).
Drop rod is sold in four standard lengths and is field cuttable. Mounts to ceiling with
one #4 screw.
|
Bright Nickel
|
|
| 4.5" (12cm) drop |
LT - 308 - NK-4.5 |
| 12" (30cm) drop |
LT - 308 - NK - 12 |
| 16" (40cm) drop |
LT - 308 - NK - 16 |
| 24" (60cm) drop |
LT - 308 - NK - 24 |
| Specification Note: Liana
Track bends easily in the field. The track should be bent to the desired curve on the
floor before installing the mounting hardware. One standoff must be used at the apex of
every curve. Be sure to specify enough hardware to accommodate the specified curve. |
|
