|
TRIATEK's APC Series Analog to Phase Cut Transducer
provides the capability to control Staefa Control System phase cut magnetic valves from a
standard miADC or VDC control signal.
Typical applications for the APC Series include new
construction or retrofit installations where Staefa Contra System magnetic valves
or motors need to be controlled by other systems or devices utilizing mADC or VDC 001-701
signals.
This unit is provided with terminals so that it can be
connected far either direct or reverse acting output. A snap track is provided for
mounting to a customer provided panel or enclosure. This unique design and competitive
pricing pro- vide the most flexibility for the price of any similar device
on the market.
This unit requires a 24VAC power supply with enough current
to power the respective output selected. When using a 420mADC control signal, TRIATEK
suggests the use of a 24VAC isolation transducer for each APC.
| A-5
APC Series
Analog Input to Phase Cut Output
Transducer |
Features & Benefits
- Field Configurable DC Input
- Steafa Phase Cut Output
- Direct Or Reverse Acting
- Mounting Track Provided
- mADC or VDC input
- One Year Warranty
Applications
- Steafa Control System Hot Water Valves
- Steafa Control System Chilled Water Valves
- General mADC or VDC Phase
- Cut Conversion
Related Products
TRIATEK'S 5.5" x 5.5" x 2.0" hinged
door enclosure, TRIATEK'S UC-3800 Series Analog Rescaling and Isolation Transducer
for analog signal conversion and Isolation. A 24VAC is recommended to reduce chance for
ground-loop.
TRIATEK manufactures complete line of sensor,
controls and transducers. Please contact the factory for additional information.
2976 Pacific Drive, Norcross GA 30071 •
Phone770-242-1922
fax 770-242- 1944 • http /www ttk.com
Due to continuous product improvement, TRIATEK reserves the right to change
product specifications without notice. |
|
