TRIATEK's MM1 Series Instrument Manifold is a three-valve manifold designed to be mounted in the pressure lines to a flow meter or differential pressure transmitter. This manifold has two block valves and an equalizer valve. It can be used in differential pressure installations including HVAC and industrial applications. The MM1 is specially suited for manifolding instruments that have other than 2 1/8" body tap center-to-center dimensions.

The soft seat, the protective bonnet cap and the below-stem packing combine to allow bubble tight valve closure and protection against galling and corrosion due to exposure to atmospheric contamination. The integral hard backseat protects against stem blow out. The MM1 Series has a compact design requiring minimum space for operation and installation. Soft seats are replaceable. The valve orifice is 3/16" in diameter. Manifolds are available in both brass and stainless steel.

Features & Benefits

• Brass or Stainless

• Protective Bonnet Cap

• Integral Hard Backseat

• Fewer Leak Points

• Increased Valve Life

• Test Ports

• Compact Design

Applications

• Flow Metering

• Chilled Water

• Differential Pressures

• Steam Flow

• Pump Differential Pressure

• Industrial Automation

Related Products

• TRIATEK's PT-500, using brass parts, and

• TRIATEK's PT-550 Series Refrigerant/Steam Pressure Transmitter for corrosive or other applications requiring a stainless steel sensing element. Pressure snubbers are recommended on the pressure input along with a three-way manifold for differential pressure measurement applications.

• TRIATEK manufactures a complete line of sensors, controls, and transducers. Please call or write for additional information.

2976 Pacific Drive, Norcross GA 30071• phone 770-242-1922 • fax 770-242-1944 • http://www.ttk.com