Lite-A-Way - Emergency Evacuation Device (Tri-Guards/Lite-A-Way)

Lite-A-Way
Designed for a long life of lifesaving duty
ADVANCED, STATE-OF-THE-ART DESIGN CONFIGURATION!

Rechargeable storage battery with 5-7 year life.
Two Models Available, LAW1CM for cornermount and LAW1FM for flush mount.
Low maintenance cost, practically zero maintenance worries.
3M Optical Lighting Film, SafeGlo phosphorescent film, and parabolic light reflectors all combine to increase luminescence between flashes.
Test switch and LED indicators ensure reliability when disaster or emergency strikes.
Compact design, measures approximately 16-3/8" x 4-1/4" and less than 1" thickness.
Waterproof. Conformally coated circuit board is sealed to prevent shorts.
Rugged durability. GE Lexan body is impact-resistant.
Comes complete with Tamperproof Hardware.
Pre-packaged with Directional Markers.
Unconditional guarantee. Should the unit malfunction or require repairs for any reason, return to Tri-Guards for free repair or replacement at manufacturer’s option.
Standards: U.L 1994^®; U.L. 924^®; NFPA 70; NFPA 101^®; N.E.C.; ASTM-1929; NFPA Smoke Chamber Test 258; GE Lexan complies with H.E.W., D.O.T., H.U.D. Flame retardant.

Lite-A-Way™

Lite-A-Way™ was subjected to independent tests applicable to U.L. Standard 924^®: Emergency Lighting and Power Equipment; and U.L. Standard 1994^®: Floor Proximity Path Marking and Lighting Systems; as well as U.L. 746C: Polymer Materials. Test results show that Lite-A-Way™ components and performance characteristics meet or exceed minimum requirements applicable to life safety/emergency devices.

Test	Results
	*	= Satisfactory
	**	= Above Satisfactory
	*******	= Optimal
Normal Operation Test Operated as intended when normal supply was interrupted, fire alarm interface was activated, as well as test switch actuated with visible derangement signals also observed.	*******
Input Test	*
Battery Discharge Test Measured battery terminal voltages exceed 525V minimal rating requirements.	**
Temperature	*
Flashing Rate Greater than 20 cycles per minute (1/3Hz), as required, with actual flash rate exceeding 1/2 Hz.	**
Overvoltage/Undervoltage Measured values exceeded minimum requirements.	**
Mold Stress Relief Distortion Test	*
Impact Test	*
Continuous Operation and Cycling Sample was subjected to 11 1/2 days of continuous operation.	**
Oven Aging Test	*
Smoke Laden Test Visibility exceeded 50% / 12 ft. smoke obscurity (required by N.F.P.A.^®, U.L. 1994^®) with both flashing light and directional indicators clearly visible.	**
Visibility Test Visibility to 300 ft. for 90 minutes.	*******

Let us show you how Lite-A-Way™ can light the way to greater safety.

Tri-Guards^® Manufacturing.	Lite-A-Way™ Sales & Marketing
Wheeling, IL 60090 800-783-8445 Email: triguardsinc@pop.net	490 W. Hintz Rd. Wheeling, IL 60090 (847) 537-8444 Fax: (847) 537-8507
Control No. 9N96 File No. SA11505(N)	Member N.F.P.A.

Lite-A-Way, Designed for a long life of lifesaving duty