|
|
Tri-Guards/Lite-A-Way
Tri-Guards - Clear Corner Protectors
Clear Corner Protectors - Page 2
Tri-Guards - Clear Corner Protectors
| WALL
GUARDS — THE RIGHT CHOICE FOR WALL-TO-WALL PROTECTION |
|||||||||
| There’s more wall than any other type of
surface in most homes and buildings-and a correspondingly greater need to ensure against
the all-too-likely potential for costly damage. Wall-Guards are available in clear Lexan and may be back-sprayed with lacquer paint to create desired color match. Custom-blended colors available special order. |
|||||||||
 |
|||||||||
Hardware and plastic anchors included.
|
|||||||||
| DRAPE-GUARDS® — DRAWlNG THE CURTAIN ON DAMAGE TO DRAPES |
|||||||||
| When curtains, blinds and other free-hanging
window treatments start blowing in the wind, the dollars you spend on repairs fly away
like autumn leaves. Made nearly indestructible by Lexan, and offered in three configurations to accommodate most needs, Drape-Guards are easily installed with provided hardware. |
|||||||||
 |
|||||||||
|
|||||||||
| TRI-D-FLECTOR™
— UNOBTRUSIVE AND UNBREAKABLE |
||||||
| Just about any well-designed vent
shield will direct the flow of air where you want it. Other than this one, however, none we know of can take the heat of frequent impact, and breeze through unscathed, time after time. 100% Lexan, the Tri-D-Flector does as good a job of deflecting self-destruction as it does of directing hot and cold air. You can stand on it, jump on it, beat it and bend it, run it over with the vacuum cleaner or a carpet shampooer.and all it takes is a quick and easy once-over with a damp cloth to restore its lifelong low-key allure. Like our other products, the Tri-D-Flector is installed as quickly as you can draw a breath. |
||||||
 |
||||||
|
||||||
| TRI-GUARDS
STICK-UM-UPS™ — THE "QUICK FIX" THAT LASTS FOR YEARS |
|||||||||
| There’s never a hold-up in
corner protection with Tri-Guards Stick-Um-Ups. In seconds, you can peel away the backing
strip, position the unit and apply gentle pressure along its length to assure a permanent
installation. Priced for savings these durable, clear plastic corner protectors are highly
resistant to cracking, denting and yellowing, keeping them looking their
back-of-the-scenes best year after year. Requires nothing more than occasional wiping with a damp cloth. |
|||||||||
|
|||||||||
| TRI-GUARDS
GENERICS — THEY SAVE YOU MONEY WITHOUT CUTTING CORNERS |
|||||||||
| For applications in which a
self-adhesive product isn’t appropriate, Tri-Guards Generics are the corner
protectors you should be asking for by name. Engineered for trouble-free installation (four drive nail screws are included), these cost-saving corner protectors are made from a long-wearing, impact-resistant polymer that won’t spilt or splinter under the hammer like many less durable brands. Like the other Tri-Guards devices, our generics are as trouble-free to maintain as they are to install. A quick pass with a damp cloth is all it takes. |
|||||||||
|
|||||||||
For more details call
Tri-Guards
1-800-783-8445