Tri-Guards/Lite-A-Way
Tri-Guards - Clear Corner Protectors
Clear Corner Protectors Abbreviated Technical Data- Page 3
Tri-Guards - Clear Corner Protectors
Abbreviated Technical Data
| PROPERTY | LEXAN 101 | LEXAN 500 | ALUMINUM | ZINC |
| SPECIFIC GRAVITY | 1.20 | 1.25 | 2.73 | 7.13 |
| TENSILE
STRENGTH psi x 103 |
9.0 | 9.6 | 8-26 | 10-25 |
| IZOD
IMPACT STRENGTH ft. Ibs. per in. notch |
16 | 2 | 4 | 4.3 |
| COEFFICIENT
THERMAL EXPANSION in /in °F x 105 |
3.75 | 1.79 | 1.3 | 1.5 |
| HEAT
DEFLECTION TEMPERATURE °F at 66 psi °F at 264 psi |
280 270 |
295 288 |
600 N/A |
210 N/A |
| UL
CONTINUOUS USE TEMPERATURE °C |
115 | 115 | N/A | 100 |
| FLEXURAL MODULUS psi x 103 |
3.4 | 5 | 100 | 60 |
| %
LOSS FLEXURAL MODULUS 2000 psi 1000 Hrs. 73°F |
16% | 10% | N/A | 20% |
| %
LOSS TENSILE STRENGTH 2000 psi at 200°F |
18% | 10% | N/A | 50% |
| DIELECTRIC
STRENGTH VOLTS PER MIL |
380 | 450 | Conductor | Conductor |
| UL
BULLETIN 94 RATING* |
94V-2 | 94V-0 | ||
| *This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions. | ||||
Self-Ignition Temperature
Approved materials shall have a self-ignition temperature of 650° Fahrenheit or greater
when tested according to ASTM D-1929.
ASTM D-1929
The self-ignition temperature of LEXAN polycarbonate is greater than 1000°F according to
ASTM D-1929.
Smoke tests* referenced by U.S. government agencies
NBS Smoke Chamber (NFPA #258)
Several governmental agencies are adopting the NBS Smoke Chamber and method of test to
measure the optical density of smoke evolved under both flaming and non-flaming
conditions.
LEXAN® polycarbonate complies with the following:
| Agency | Application |
| H.E.W. | Interior finish for hospitals and medical facilities |
| H.U.D | Plastic bathroom tub and shower units |
| D.O.T | Combustible materials used in transit systems |
| Maximum Optical Density | |
| H.E.W. | Average of flaming and non-flaming conditions must be less than 450 |
| H.U.D | Less than 450 under flaming conditions |
| D.O.T | Under flaming and non-flaming conditions: Less than 100 after 90 seconds Less than 200 after 4 minutes |
| Results from small scale Flammability Tests (e.g., Numerical Flame Spread Ratings) are not intended to reflect hazards presented by this or any other material under actual fire conditions. | |
LITE-A-WAY
DESIGNED FOR A LONG LIFE OF LIFESAVING DUTY
- Rechargeable storage battery with 5-7 year life.
- Two Models Available, LAW1CM for cornermount and LAW1FM for flush mount.
- Low maintenance cost, practically zero maintenance worries.
- 3M Optical Lighting Film, SafeGlo phosphorescent film, and parabolic light reflectors all combine to increase luminescence between flashes.
- Test switch and LED indicators ensure reliability when disaster or emergency strikes.
- Compact design, measures approximately 16-3/8" x 4-1/4" and <1" thickness.
- Waterproof. Conformably coated circuit board is sealed to prevent shorts.
- Rugged durability. GE Lexan body is impact-resistant.
- Comes complete with Tamperproof Hardware.
- Pre-packaged with Directional Markers.
- Standards: U.L. 1994; U.L. 924; NFPA 70; NFPA 101; N.E.C.; ASTM-1929; NFPA Smoke Chamber Test 258; GE Lexan complies with H.E.W., D.O.T., HUD. Flame retardant.

TRI-GUARDS PRODUCTS PROTECT INTERIOR SURFACES WITH A POLYMER SHIELD THATS ALMOST INVISIBLE! PROTECTING INTERIOR DECORATION IN HIGH TRAFFIC AREAS IS A COSTLY AND CONTINUING PROBLEM.
NOW BY SPECIFYING TRI-GUARDS PRODUCTS YOU CAN SHOW YOUR CLIENTS HOW TO CONTROL THESE COSTS IN A HANDSOME AND DECORATIVE WAY.
![]()
protection products are really tough
AS A MATTER OF FACT, THEY ARE PRACTICALLY INDESTRUCTIBLE. THE REASON: TRI-GUARDS PRODUCTS ARE MADE FROM LEXAN®, A HIGH IMPACT MATERIAL DEVELOPED BY GENERAL ELECTRIC FOR THE U.S. SPACE PROGRAM.
THEY WONT CRACK, CHIP, OR DENT, EVEN AFTER YEARS OF HARD USE. TRI-GUARDSTHE MODERN WAY TO PROTECT VULNERABLE INTERIOR DECORATING.

490 Hintz Road Wheeling, Illinois 60090
Telephone (847) 537-8444 (800) 783-8445 FAX (847) 537-8507
Email: triguardsinc@pop.net
© Copyright 1997-98




