STANDARD MOUNTING METHODS |
| Add “W” to
prep for Glass Mount. Specify Glass Thickness, Hole Diameter and Finish. Non-Standard
Preps available by quotation only. Products marked “Combo Pack” include
fastening kit for mounting to wood, concrete and plaster/drywall. |
A |
B |
C |
D |
Threaded Stud
and Cap Nuts |
Thru-Bolt
and Cap Nut |
Thru-Bolt
and Cast Lug
Not for glass mounting |
Machine Screws
and Threaded Sleeve |
E |
F |
G |
H |
Thru-Bolt and
Finish Washer
Not for glass mounting. |
J-20 Hook (For Push
Bars only-one end)
Not for glass mounting. |
Threaded Shoulder Bolt
and Set Screw |
Thru-Bolt |
| I |
J |
K |
B3 OR B4
|
Blind Screw
(Door detail required)
Not for glass mounting. |
Shoulder Bolt and Set Screw
Round Bases Specify Riv-Nut “R3” or “R4” below if required, for use on
aluminum doors. Not for glass mounting. |
Sex Bolt |
Wood Thread to Machine Thread Bushing For J or M Mountings on Wood Doors B3-1/4-20 Thread
B4- 5/16-18 Thread
|
|
| L |
M |
N |
R3 OR
R4 |
Spanner Turning Washer and Stud.Concealed
Mounting for Round Bases For Standard Metal, Wood or Glass Doors. Specify. |
Spanner Turning Washer,Stud Single Mounting for Round Bases
R5 - 3/8-24 thread at right if required. |
Flow Thru Button Single Mounting for
Round Bases Specify Riv-Nut “R3” or “R4” Glass Doors. Specify. |
Riv-Nut R3-1/4-20 thread R4 - 5/16-18 thread
For Standard |
