tc02a.gif (3215 bytes)

tc02b.gif (4570 bytes)

 tc02c.gif (3608 bytes)

 

EDGE GUARDS
tc50a.gif (4715 bytes)

TRIMCO  #  KE31-1
OA  90° x up to 42"
OD  1-3/4"   
RET  7/8"
BHMA  J204
Br, Bz, SS
Edge Guard - For non-beveled stile on single acting door.

tc50b.gif (4431 bytes)

 TRIMCO   #  KE32-1
OA  93° x up to 42"
OD  1-3/4"   
RET  7/8"
BHMA  J205
Br, Bz, SS
Edge Guard - For stile beveled 1/8" on single acting door.
tc50c.gif (5136 bytes)  

TRIMCO  #  KE33-1
OA  90° x up to 42"
OD  1-3/4"   
RET  7/8"
BHMA  J210
Br, Bz, SS
Edge Guard - For non-beveled stile on double acting door.

 tc50d.gif (6631 bytes)  

TRIMCO  #  KE34-1
OA  DA x up to 42"
OD  1-3/4"   
RET  7/8"
BHMA  J212
Br, Bz, SS
Edge Guard - Double Acting. For radius stile on double acting door.
tc50e.gif (4828 bytes)  

TRIMCO  #  KE35-1
OA  90° x up to 42"
ID  1-3/4"   
RET  1-1/4"
BHMA  J201
Br, Bz, SS
Edge Guard - For non-beveled stile on single acting door.

 tc50f.gif (4931 bytes)  


TRIMCO  #  KE36-1
OA  93° x up to 42"
ID  1-3/4"   
RET  1-1/4"
BHMA  J202
Br, Bz, SS
Edge Guard - For stile beveled 1/8" to 2" on single acting door.
tc50g.gif (4700 bytes)
TRIMCO  #  KE37-1
OA  90° x up to 42"
ID  1-3/4"   
RET  1-1/4"
BHMA  J207
Br, Bz, SS
Edge Guard - For non-beveled stile on double acting door.		 tc50h.gif (5133 bytes)
TRIMCO  #  KE38-1
OA  DA x up to 42"
ID  1-3/4"   
RET  1-1/4"
BHMA  J209
Br, Bz, SS
Edge Guard - For radius stile on double acting door.
tc50i.gif (1091 bytes)  

TRIMCO  #  K39
Fingerguard - Nursery and
pre-school item protects
little fingers from getting pinched between door and jamb.

 tc50j.gif (2258 bytes)  

TRIMCO  #  KH050
Handicap Kickplate -
To cover glass on narrow stile aluminum doors.

NOTE: For angle edgeguards, we suggest 1/16" less than door thickness. For edgeguards, specify: Handing, Mortise, Non-Mortise, Bevel, Non-Bevel, No Cut Outs, With Cut Outs. Need Drawing on all Cut Outs and Special Screw Locations. Holes are drilled approximately 3/8" from edge and spaced six inches apart. Do not pre-drill doors. Include drawings for all special screw patterns, cut-outs. Over 42" by quote. Tolerance on all dimensions ± 1/16".


24 HOUR FAX: 800-637-8746 ID-inside diameter, OA-overall size, OD-outside diameter,   RET-return width