|
|
RIGIWALL--E |
Protective Wallcovering |
Suggested Applications
BOLTARON® 4333 is a high impact vinyl acrylic interior wallcovering designed to protect surface areas from abuse. It offers excellent impact
resistance, stain resistance, and chemical resistance. Applications include high traffic areas in health facilities, hotels, restaurants, institutions
and commercial buildings.
Available in haircell surface texture only.
Fire Hazard Classification
When tested in accordance with ASTM E-84 Surface Burning Characteristics of Building Materials, BOLTARON 4333 yielded these results:
Gauge |
.022" |
.028" |
.040" |
.060" |
.100" |
Flame Spread |
10
15* |
15 |
15 |
15 |
15 |
Smoke Developed |
20
90-140* |
15 |
60 |
200 |
230 |
BOLTARON 4333 surfacing applied to non-burning inorganic substrate using 3M Company's Fast Bond #30 contact adhesive. Application
rate 350 sq. ft./gal.
BOLTARON 4333 surfacing applied to non-burning inorganic substrate using Super-XT-2000 Mastic Adhesive. Application rate 165 sq.
ft./gal.
Underwriter's Laboratories Listed and Tested: See Fire Hazard classification for test details.
Class A Interior Finish Material: National Fire Protection Association Life Safety Code 101.
Class 1 Interior Finish Material: BOCA Basic Building Code.
|
Specification subject to change without notice.
BOLTARON 4333 - Typical physical properties
Property |
Test Method |
Typical Value |
Specific Gravity |
ASTM D-792 |
1.37 psi |
Tensile Strength |
ASTM D-638 |
5,200 psi |
Modulus of Elasticity (Tensile Modulus) |
ASTM D-638 |
250,000 psi |
Ultimate Elongation |
ASTM D-638 |
75% |
Flexural Strength |
ASTM D-790 |
8,300 psi |
Flexural Modulus |
ASTM D-790 |
290,000 psi |
Hardness |
|
|
|
Shore D |
ASTM D-2240 |
69 |
|
Rockwell R |
ASTM D-785 |
106 |
Izod impact (Notched) |
ASTM D-256 |
10-15 ft lbs |
Heat Distortion Temp. |
|
|
|
@ 264 psi (Annealed 24 hrs @ 170°F) |
ASTM D-648 |
165°F |
Dimensional Stability |
5' X 320F
24 hrs @ 158°F
7 days @ 158°F |
13%
1%
1% |
Taber Abrasion |
|
|
Weight Loss |
|
|
|
(CS 17 Wheel, 1Kg, 1000 cycles) |
ASTM D-1044 |
0.073g |
Heat Aging |
24 hrs @ 158°F |
0.4 |
|
Color Change in L*a*b* units |
7 days @ 158°F |
0.6 |
Water vapor Transmission |
ASTM E-96 Procedure BW
Procedure B |
0.13 US Perms
0.08 US Perms |
Coefficient of Lineal Thermal
Expansion |
ASTM D-696 |
5 x 10-5 in/in °F |
|
Fabrication Data
BOLTARON 4333 may be drilled, sawn and cut using conventional wood, plastic or metal-working tools. Angles may be brake formed if
necessary (however, over-bending will be required). Heating the sheet will improve its formability and reduce the possibility of stress-whitening
along the bend.
