|
|
TRUEBRO
LAV Guard
LAV Guard Page - 1
LAV Guard
UNDERSINK PROTECTIVE PIPE COVERS
General Description
The LAV GUARD undersink protective pipe cover is the "original" high-quality ADA piping protection system, proven at thousands of facilities
across the USA. The designer-style, highly-durable LAV GUARD is soft and flexible, universally adaptable to any 1 1/4" or 1 1/2"
P-trap/tailpiece assembly and 3/8" or 1/2" angle stop valve assembly.*
*The LAV GUARD will not fit Schedule 40 plastic P-traps.
Features and Benefits
- ADA-conforming design protects wheelchair users from scalding and sharp, abrasive surfaces. LAV GUARD protective covers have excellent insulation properties while maintaining a smooth, non-abrasive surface.
- Rotatable, flexible design makes on-site adjustment and installation easy. The LAV GUARD allows for on-site fitting to meet unexpected jobsite conditions and unusual piping configurations (see diagram). The LAV GUARD is easy to install. No trap disassembly is required.
Patented Lock-Lid™ covers angle stop valves while allowing for convenient servicing. The
hinged Lock-Lid is molded into the angle stop valve cover, and latches shut-minimizing tampering.
- Unique, patented Snap-Clip™ reusable fasteners simplify installation and servicing. New flush, non-abrasive fasteners install in seconds, are self-trimming leaving no sharp edges, and are tamper-resistant.
- Internal rib design maximizes safety. Compared to other pipe covers on the market, the LAV GUARD internal rib design increases thermal resistance and provides soft, resilient cushioning (see diagram).
- Easy-to-clean, antimicrobial vinyl minimizes maintenance. The LAV GUARD is molded from impact-resistant, stain-resistant, antimicrobial vinyl. Its smooth surface makes the LAV GUARD exceptionally easy to clean and maintain.
- Variety of models, colors, and accessories assure the right product for your needs. The LAV GUARD is available in six different models, in gray or white, with optional accessories to assure proper installation (see ordering chart).
- Strict code compliance minimizes risk. The LAV GUARD complies with ADA article 4.19.4, California P 1504B, ANSI A117.1, BOCA P 1203.4, New York and other state and local regulations.
Specifications
Cross-Section View
Gray and White Models Available
#99 |
one angle valve and one supply tube cover |
#100 |
one P-trap cover |
#101 |
one P-trap cover, one angle valve, and one supply tube cover |
#102 |
one P-trap cover, two angle valve covers, and two supply tube covers |
#103 |
one P-trap cover, two angle valve covers, two supply tube covers, one 5" offset tailpiece wheelchair strainer cover |
#103K |
same as #103 with one 6" Kohler offset tailpiece wheelchair strainer cover |
#105 |
Accessories |
#105K |
one 6" Kohler offset tailpiece wheelchair strainer assembly |
#EX99 |
Extensions |
#EX100 |
one 16" extension for waste arm or tailpiece |
Suggested Specification
ADA-conforming, wheelchair accessible lavatory P-trap and angle valve assemblies shall be covered with the molded, antimicrobial
TRUEBRO, INC. LAV GUARD undersink protective pipe cover Model _____________, Accessory _____________, Color
________________ (white or gray). Cover shall be secured with Snap-Clip flush reusable fasteners, angle stop shall have Lock-Lid locking
access cover.
For additional information on this and other fine TRUEBRO products, contact:
TRUEBRO, INC.
7 Main Street
P.O. Box 440
Ellington, CT 06029
Outside CT: 800-340-5969
Inside CT: 860-875-2868
Fax: 860-872-0300
Internet: http://www.truebro.com
U.S. Patents #5,054,513; 5,163,469; 5,259,410; 5,303,730; 5,360,031; 5,419,364; 5,454, 392; 5,540,255; 5,524, 669; 1,424,032; 7,8511. Other patents pending.