OVER-THE-POST FITTINGS W

Level Quarterturn

7011*, 7211*, 7411*, 7011 - 45**
This fitting enables a level rail to make a turn. Use a 7021 Level Quarterturn With Cap and newel for more support.
* 90° turn. **135° turn.

Up - Easing

7012, 7212, 7412

Up-easings are used to change directions of rail smoothly from normal rake to various other fittings.

Over - Easing

7013, 7213, 7413, 7013 -16

Over-easings are used to transition between an upper level section and a lower angled section of rail. 7013-16 is 16" long and provides a more gradual transition.

Opening Cap

7019, 7219, 7419

This fitting may be used with a starting newel to begin a level section of divider rail.

Tandem Cap

7020, 7220, 7420

Tandem caps permit the introduction of supporting newel posts in long sections of level rail. Customarily used with landing newels.

Level Quarterturn With Cap

7021*, 7221*, 7421*, 7021 - 45**

This fitting enables a level rail to make a 90° turn while being supported by a landing newel at the critical turning point.
* 90° turn. **135° turn.

2-Riser Gooseneck With Cap and Up-Easing

7060 or 7065, 7260 or 7265, 7460 or 7465

The preferred fitting used at the turning point of a stairway where a landing is involved to connect two angled sections of rail. Customarily used with landing newels.

1- Riser Gooseneck

7070 or 7075, 7270 or 7275

Used at the turning point at the top of a stairway where a banister is involved to connect the angled section of rail to the level section.

2- Riser Gooseneck

7071 or 7076, 7271 or 7276

Used to turn railing at the top of a stairway and connect to level banister. For a 42" balcony rail.