 DRYWALL TRIMS
GOLDLINE Paper-Faced Metal Drywall Beads and Trims are made
with a unique, high quality paper laminated to various metal forms, produced using high
quality galvanized steel which meets or exceeds ASTM A653 zinc coating specifications. The
metal provides maximum strength and protection for the corner while the paper provides
reinforcement to prevent cracking caused by the movement or shrinkage of framing members.
GOLDLINE beads and trims are quickly installed without fasteners by embedding into
standard drywall joint compound, or setting-type compound-to speed job completion. The
result is a clean, precise corner that is long lasting, provides superior resistance to
edge cracking, rust resistance and not subject to fastener popping.
All trims are packaged 50 pieces per box,
palletized in 40 box pallets and stocked in 8' and 10' lengths. Other lengths may be
factory ordered.
OUTSIDE CORNERS
G1-W, G1-XU, and G1-XW are used for 90° corners.
G1-0 is used for other corners. All can be used with any
thickness of wall board.
TYPE |
DIMENSIONS |
| A |
B |
C |
D |
G1-W STANDARD |
7/8 |
1/2 |
3/4 |
7/8 IN. |
G1-U WIDE EQUAL
LEG |
3/4 |
3/4 |
3/4 |
3/4 IN. |
G1-XW EXTRA
WIDE |
3/4 |
5/8 |
7/8 |
3/4 IN. |
| G1-XU EXTRA WIDE EQUAL LEG |
5/8 |
7/8 |
7/8 |
5/8 IN. |
| G1-10 OFF ANGLE |
5/8 |
1/2 |
3/4 |
5/8 IN. |
INSIDE CORNERS
G-2 is used for 90° corners. G2-0 is used for off angle
corners. Both types provide a strong, clean corner joint with any thickness of wall board.
TYPE |
DIMENSIONS |
| A |
B |
C |
D |
G2 STANDARD |
5/8 |
3/8 |
3/8 |
5/8 IN. |
G2-O OFF ANGLE |
5/8 |
5/8 |
5/8 |
5/8 IN. |
|
