Light Gauge
Steel - Construction Hardware
 |
QuickSpec Guide |
 |
| This
guide is intended for quick reference only, please refer to the full line catalog &
TrusSteel Details for important safety and installation specifications. |
Welded Truss Clip - WTC
| |
|
TOTAL
UPLIFT CAPACITY IN POUNDS |
| CHORD |
GAUGE |
CLIP ON ONE FACE |
CLIP ON EACH FACE |
| 28TSC |
22 |
730 |
1640 |
| 33TSC |
20 |
730 |
2040 |
| 43TSC |
18 |
730 |
3040 |
| 54TSC |
16 |
730 |
3090 |
Uplift loads have been increased 1/3 for wind or
earthquake. No further increase is allowed.
PRODUCT FEATURES
- Available in 16 gauge and 1/4" non-galvanized steel to
help provide a consistent weld across a light gauge steel top track or a steel I-beam.
INSTALLATION
- Weld to light gauge steel top track or steel I-beam.
- Attach to TrusSteel chord section with #10 self drilling
screws.
- Refer to TrusSteel detail TS027 for other important
information.
|
Hanger - TSJP
| |
TSJP22
ALLOWABLE LOAD TABLE |
| GIRDER
CHORD GAUGE |
| 28TSC |
33TSC |
43TSC |
| (22GA) |
(20GA) |
(18GA) |
| DOWN |
740 |
920 |
1380 |
| UP (GRAVITY) |
680 |
770 |
1010 |
| UP (WIND) |
900 |
1020 |
1350 |
| |
TSJP24
& TSJP44 ALLOWABLE LOAD TABLE |
| GIRDER
CHORD GAUGE |
| 28TSC |
33TSC |
43TSC |
54TSC |
| (22GA) |
(20GA) |
(18GA) |
(16GA) |
| DOWN |
920 |
1140 |
1350 |
1360 |
| UP (GRAVITY) |
610 |
780 |
1010 |
1130 |
| UP (WIND) |
810 |
1040 |
1340 |
1510 |
Uplift loads have been increased 1/3 for wind or
earthquake. No further increase is allowed.
PRODUCT FEATURES
- These truss to truss hangers are manufactured to match the
geometry of the TrusSteel chord to provide a tight effective connection as well as easy
installation.
- Available for TSC2.75 to TSC2.75, TSC2.75 to TSC4.00 and
TSC4.00 to TSC4.00 chord connections.
INSTALLATION
- Attach to TrusSteel chord section with #10 self drilling
screws.
- Refer to TrusSteel detail TS022 and TS022a for other
important information.
|
Uplift Attachment - TSUC
| |
TOTAL
UPLIFT CAPACITY TO LIGHT GAUGE STEEL |
| GRADE 33,
WALL TOP PLATE - GAUGE |
CLIP(S) |
22 |
20 |
18 |
16 |
14 |
12 |
| One Side |
230 |
280 |
370 |
460 |
500 |
500 |
| Both Sides |
550 |
670 |
870 |
1100 |
1380 |
1640 |
| |
TOTAL
UPLIFT CAPACITY TO WOOD |
| CLIP ON |
CLIP ON |
| ONE FACE |
EACH FACE |
| Spruce-Pine-Fir |
320 |
760 |
| Hem-Fir |
340 |
800 |
| Douglas-Fir |
450 |
1080 |
| Southern Pine |
500 |
1300 |
| |
TOTAL
UPLIFT CAPACITY TO CONCRETE |
| CONCRETE |
CLIP ON |
CLIP ON |
| STRENGTH (PSI) |
ONE FACE |
EACH FACE |
| 2000 |
160 |
450 |
| 3000 |
220 |
620 |
| 4000 |
230 |
660 |
| 5000 |
260 |
730 |
Uplift loads have been increased 1/3 for wind or
earthquake. No further increase is allowed.
PRODUCT FEATURES
- Unique design provides strength to achieve a strong uplift
connection.
- Manufactured to match the geometry of the TrusSteel chord to
provide easy installation.
- Easy installation to bearing.
- Unique design provides versatility when attaching to
different bearing surfaces.
INSTALLATION
- Attach to TrusSteel chord section with #10 self drilling
screws.
- Refer to TrusSteel detail TS028 through TS033 for other
important information.
- TSUC5, 7, 9 and 11 also available.
|
|
