USG Cavity Shaft Wall Systems
Metric Equivalents
Dimension |
Conversion Type |
Ft./In. |
mm(2) |
SHEETROCK Gypsum Panels |
Thickness |
Soft |
1/4" |
6.4 |
|
|
3/8" |
9.5 |
|
|
1/2" |
12.7 |
|
|
5/8" |
15.9 |
|
|
3/4" |
19.1 |
|
|
1" |
25.4 |
Width |
Hard |
24" |
600 |
|
|
48" |
1200 |
Length |
Hard |
8' |
2400 |
|
|
10' |
3000 |
|
|
12' |
3600 |
Steel Stud Framing |
Thickness (gauge) |
Soft |
.0179 (25) |
.45 |
|
|
.0270 (22) |
.69 |
|
|
.0329 (20) |
.84 |
Width |
Hard |
1-5/8" |
41.3 |
|
|
2-1/2" |
63.5 |
|
|
3-1/2" |
88.9 |
|
|
3-5/8" |
92.1 |
|
|
4" |
101.6 |
Length |
Hard |
8' |
2400 |
|
|
10' |
3000 |
|
|
12' |
3600 |
THERMAFIBER Insulation |
Thickness |
Soft |
1" |
25.4 |
|
|
1-1/2" |
38.1 |
|
|
2" |
50.8 |
|
|
3" |
76.2 |
|
|
4" |
101.6 |
|
|
6" |
152.4 |
Width |
Hard |
16" |
400 |
|
|
24" |
600 |
Length |
Hard |
48" |
1200 |
(1) Conversion Type: "Soft" is metric relabeling with no physical change of dimension; "hard" is a physical change to the metric dimension
shown.
(2) Conversion factors: Inches x 25.4 = mm; Feet x 304.8 = mm. Notes: Availability: Items above are not stocked in metric lengths or widths.
Minimum quantity orders may be required. Leadtime should be determined; upcharges may apply, Geographic availability may vary and
should be verified for the project location. Lengths: Shown on SHEETROCK Gypsum Panels and steel stud framing for illustration purposes
only. Framing Spacing: 16" o.c. converts to 400 mm o.c.; 24" converts to 600 mm o.c.
Product Information and Literature
800 USG.4YOU (874.4968)
http://www.usgcorp.com
United States Gypsum Company Area Sales Offices
A-H | I-M | N-T | U-Z/International
Arizona
Phoenix: 602 866.0795
California
Fremont: 510 792.4400
Glendale: 818 956.1882
Florida
Boca Raton: 407 989.0035
Jacksonville: 904 764.3293
Georgia
Atlanta: 770 393.0770
Hawaii
Honolulu: 808 591.8815
Back to Index
Illinois
Chicago: 312 606.5488
Indiana
Indianapolis: 317 848.1513
Louisiana
New Orleans: 504 241.2020
Maryland
Baltimore: 410 355.2200
Massachusetts
Charlestown: 617 557.3200
Michigan
Southfield: 810 569.1900
Minnesota
Bloomington: 612 854.4233
Missouri
Fenton: 314 349.0980
Back to Index
New York
Albany: 518 458.7437
Stony Point: 914 786-2820
North Carolina
Charlotte: 704 552.7402
Ohio
Westlake: 216 899.7333
Oregon
Beaverton: 503 626.8864
Tennessee
Brentwood: 615 371.6149
Texas
Dallas: 214 490.0771
Houston: 713 868.9937
Back to Index
Utah
Murray: 801 266.4975
Virginia
Richmond: 804 378.5961
International Division
Chicago: 312 606.5840
Back to Index
Metric Specifications
USG Corporation, through its operating subsidiaries, will provide metric conversions on its products and systems to help specifiers match
metric design sizes. In addition, some products are available in metric dimensions from selected manufacturing plants. Refer to SA100
Construction Selector for additional information and a Table of Metric Equivalents.
Trademarks
The following trademarks used herein are owned by United States Gypsum or a related company: US SHEETROCK, FIRECODE, DUR-A-
IMPERIAL, RC-1, DUROCK, DURABOND, ULTRACODE, EASY SAND. TYPE S AND S-1 2 ARE TRADEMARKS OF ITW BUILDEX.
THERMAFIBER is a trademark of THERMAFIBER LLC.
Notice
We shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of
these goods not in accordance with current printed instructions or for other than the intended use. Our liability is expressly limited to
replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty (30 days from date it was or
reasonably should have been discovered.
Note
All products described here may not be available in all geographic markets. Consult your local sales office or representative for information.
Safety First!
Follow good safety and industrial hygiene practices during handling and installing all products and systems. Take necessary precautions and
wear the appropriate personal protective equipment as needed. Read material safety data sheets and related literature on products before
specification and/or installation.
United States Gypsum Company
A Subsidiary of USG Corporation
125 South Franklin Street
P.O.Box 806278
Chicago, IL 60680-4124
|
