architecture - engineering - construction
USHIO America
General Illumination Lamps
General Illumination Lamps - Page 23
General Illumination Lamps
METAL
HALIDE LAMPS • WITH REFLECTOR |
- Uses Standard Ballasts and Ignitors
- M91, M90 or Electronic Equivalent
- Cold Mirror Reflector - concise front end
- No cooling necessary under normal conditions
- Channels Plug Base
|
|
| Watts |
Ushio Ordering |
Ushio
Lamp Code |
BLV
Code |
Volts |
Ignition Voltage
kV |
Lamp Current
A |
Luminous Flux through Aperature |
Color Temp
K |
CRI |
Avg Life
h |
| ø13mm |
ø10mm |
ø25mm |
(A) |
(B) |
(C) |
| |
Channel Plug Base |
| 100 |
5000789 |
MHR-100D1 |
270220 |
95 |
4 |
1.2 |
1600 |
1800 |
4600 |
5200 |
72 |
6000 |
| 100 |
5000790 |
MHR-100D/HR2 |
270221 |
95 |
4 |
1.2 |
1600 |
1800 |
4600 |
5200 |
72 |
6000 |
| 150 |
5000834 |
MHR-150N* |
270311 |
95 |
4 |
1.8 |
2000 |
2200 |
5300 |
4200 |
75 |
6000 |
|
| Warm-up Time to 95% Luminous
Flux: 2.5 minutes with standard ballast |
| Optimal distance from reflector to fiber: |
42mm (ø13mm fiber bundle) |
| Length of Lead Wires: |
Approx. 40mm |
| Base Type: MHR-100D
MHR - 100D/HR
MHR - 150N |
AMP Universal Mate-N-Lok 3 channel plug
5 channel plug
5 channel plug |
|
| 1Regnition Time:
Approximately 1 minute |
| 2Hot Re-strike Version |
| *Available in 5200K on special
order. |
The MHR-100D was specifically designed
for fiber optic and light pipe applications. This lamp is predominantly used in
applications with a fiber diameter of more than 8mm at the input. This lamp offers an
unproblematic operation with standard ballasts and thus lowers cost applications. |
Orders and Inquiries • Toll-free Continental U.S.
and Canada 800.838.7446 • Fax 800.776.3641 • www.ushio.com |
