|
[A] Diamond Mesh
A multi-purpose plaster base and reinforcement. The flat
surface is easily cut and formed for curved surfaces and structural fireproofing.
Thousands of plaster keys assure complete bond.
Tile cap found on Page 12
Item 13
| Finish |
Wt.per Sq. Yd. |
Sheet Size |
Pcs./ Bdl. |
Yds./ Bdl. |
Yds./ Pallet |
| EG or Galv. |
1.75 lbs. |
27" x 96" |
10 |
20 |
1000 |
| EG or Galv. |
2.5 lbs |
27" x 96" |
10 |
20 |
1000 |
| Galv. |
3.4 lbs. |
27" x 96" |
10 |
20 |
1000 |
Also available in Self-furred (dimpled) 500 Yds. Per
Pallet.*
[B] 3/8 Rib Lath (Hi Rib)
The deep longitudinal ribs provide extra strength enabling
use on walls and ceiling spans of 24". This excellent product is also used on 2"
stud-less partitions and as reinforcement for concrete floor and roof slabs.
| Finish |
Wt.per Sq. Yd. |
Sheet Size |
Pcs./ Bdl. |
Yds./ Bdl. |
Yds./ Pallet |
| EG or Galv. |
3.4 lbs. |
27" x 96" |
10 |
20 |
1000 |
Sizes indicated are net coverage. Lath is manufactured with
additional material to provide laps at ends and sides.
[C] Flat Rib
A more rigid lath than diamond metal lath, its 1-1/2"
center, 1/8" longitudinal ribs provide greater stiffening allowing wider
spacing between wood or metal supports. Small opening excellent keying of plaster.
| Finish |
Wt.per Sq. Yd. |
Sheet Size |
Pcs./ Bdl. |
Yds./ Bdl. |
Yds./ Pallet |
| EG or Galv. |
2.75 lbs |
27" x 96" |
10 |
20 |
1000 |
| Galv. |
3.4 lbs. |
27" x 96" |
10 |
20 |
1000 |
[D] Spray Lath
Self-furred diamond mesh lath with factory applied Kraft
paper backing for plaster gun or hand trowel application. The paper prevents excessive
plaster from passing through the steel mesh.
| Finish |
Wt.per Sq. Yd. |
Sheet Size |
Pcs./ Bdl. |
Yds./ Bdl. |
Yds./ Pallet |
| EG or Galv. |
2.5 lbs |
27" x 48" 27" x 96" |
10 10 |
10 20 |
300 600 |
| Galv. |
3.4 lbs. |
27" x 48" 27" x 96" |
10 10 |
10 20 |
300 600 |
3.4#Spray Lath for 24" o/c. framing.
2.5# Spray Lath for 16" o/c. framing.
[E] Spray Rib
3/8" Hi Rib metal lath with factory applied Kraft
paper backing. The longitudinal ribs provide a self -furring feature. The ribs also
give exceptional strength, allowing spans of 24". The paper backing prevents the loss
of plaster with machine application.
| Finish |
Wt.per Sq. Yd. |
Sheet Size |
Pcs./ Bdl. |
Yds./ Bdl. |
Yds./ Pallet |
| Galv. |
3.4 lbs. |
27" x 96" |
10 |
20 |
1000 |
[F] Spray Flat Rib
Self-furred rib in 4' or 8' lengths backed with two
12" wide 50 lb. brown Kraft paper. Ideal for machine applied plaster.
| Finish |
Wt.per Sq. Yd. |
Sheet Size |
Pcs./ Bdl. |
Yds./ Bdl. |
Yds./ Pallet |
| EG or Galv. |
2.75 lbs |
27" x 48" 27" x 96" |
10 10 |
10 20 |
500 1000 |
| Galv. |
3.4 lbs. |
27" x 96" |
10 |
20 |
1000 |
NOTE: Electro-Galvanized(EG) is a
substitute for Painted Lath but not Hot Dipped Galvanized.
STANDARD METAL LATH • SPRAY LALH PRODUCTS |
|
