architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Western Metal   Western Metal  

Western Metal - Page 4

   

Western Metal

FULL PAPER BACK METAL LATH

[G] Black Asphalt Mesh D

Also Available in 1.75 lbs.

A multi-purpose diamond mesh metal lath with continuous backing of asphalt saturated Kraft Paper. Meets Federal Specifications UU-B790A Style 2 Grade D. Paper is "held back" on ends and sides to allow proper lapping and correct mechanical keys.

Finish Wt.per Sq. Yd. Sheet Size Pcs./ Bdl. Yds./ Bdl. Yds./ Pallet
EG or Galv. 2.5 lbs 27" x 96" 10 20 1000
Galv. 3.4 lbs. 27" x 96" 10 20 1000

2.5# is for 16" o/c. open framing.

3.4# is for 24" o/c. open framing.

Also available self-furred ribbed.

500 Yards Per Pallet

Western Metal Lath is not responsible for pinholes in the self-furred metal lath.

[H] Aqua Mesh B

Waterproof paper for moderate vapor barrier conditions. Used in tub and shower areas, as well as backing for exterior plastering. A diamond mesh metal lath with continuous backing of asphalt laminated Kraft paper meeting Federal Specifications UU-B-790A, Type 1, Grade B, Style 1a, and FHA Specifications 20-H. Manufactured with paper lap on one end and on one side. Applied weather board fashion.

Finish Wt.per Sq. Yd. Sheet Size Pcs./ Bdl. Yds./ Bdl. Yds./ Pallet
EG or Galv. 2.5 lbs 27" x 96" 10 20 1000
Galv. 3.4 lbs. 27" x 96" 10 20 1000

2.5# is for 16" o/c. open framing.

3.4# is for 24" o/c. open framing.

Also available self-furred ribbed

500 Yards Per Pallet

Western Metal Lath is not responsible for pinholes in the self-furred metal lath.

[I] Pyro-Kure Mesh P.K.

For use when both a moderate vapor resistance and non-combustible fiber backing is necessary. A diamond mesh metal lath backed with Pyro-Kure 604 paper meeting Federal Specification UU-B-790, Type 1 Grade A, Style 1a; and a maximum flame spread rating (Underwriters Laboratories) of 25.

All paper products conform Uniform Building Code (UBC) Standard 14-1 and Chapter 25 Table 25-B, 25-C.

Finish Wt.per Sq. Yd. Sheet Size Pcs./ Bdl. Yds./ Bdl. Yds./ Pallet
EG or Galv. 2.5 lbs 27" x 96" 10 20 1000
Galv. 3.4 lbs. 27" x 96" 10 20 1000

2.5# is for 16" o/c. open framing.

3.4# is for 24" o/c. open framing.

Also available self-furred ribbed

500 Yard Per Pallet

Western Metal Lath is not responsible for pinholes in the self-furred metal lath.

NOTE to Architects and Specifiers:

Weight shown are exclusive of paper. Lath provides the mechanical keys (over 10,000 per square yard). Plaster does not permeate and/or depend on the paper for any strength; allowing the paper to do the job intended.

PAPER BACK METAL LATH



Request for Information / Request a Catalog from Western Metal
 
 
 
To request more information from Western Metal, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.