PRE-ENGINEERED
GARAGE PACKAGES |
Western Metal Lath garage packages are marketed throughout
the Western States. A standard for all three packages: one car, two car, and three car
garage, has been developed by Zylstra & Associates Engineering.
These packages were designed with the following design
basis:
Seismic analysis (UBC Zone IV)
Wind analysis (UBC Exposure C, 80 MPH)
Foundation design 100 psf (no local frost requirements)
Snow 50 psf (Ground) special manufactured pkg. req.
Truss: Gus Truss roofing system manufactured by Western
Metal Lath.
Framing System will be Western Metal Lath galvanized steel
framing materials.
No site visits or special inspection are anticipated, or
are the responsibility of the Engineer of Record.
Western Metal Lath is only packaging the light gauge steel
framing products they product. Only the shown dimension are available in a package form.
If any modification to the framing plan is necessary, the Engineer of Record should be
contacted by the customer.
| Framing Plans |
Written Instructions |
| Cost Effective |
Pre-Assembled Trusses |
| Pre-Engineered |
Pre-Punched for Utilities |
| Termite Resistant |
Precut Framing Components |
| Noncombustible |
Accepts Most Exterior Finishes |
| Stronger Structure |
Engineered for 50 lb. Snow Load |
| Assembly
Required |
HARDWARE AND FASTENERS ARE NOT INCLUDED.
ONLY FRAMING MEMBERS MANUFACTURED BY WESTERN METAL
LATH ARE PART OF THIS PACKAGE.
ALL ADDITIONAL MATERIALS ARE THE RESPONSIBILITY OF
THE CUSTOMER.
|
