CERTIFICATION

THIS IS TO CERTIFY THAT ALL METAL LATH AND ACCESSORIES MANUFACTURED BY WESTERN METAL LATH ( ICBO # 4135), CONFORMS TO THE FOLLOWING SPECIFICATIONS:

• Electro-Galvanized (EGC) #1.75, #2.5 and #3.4 Metal Lath

• Conforms to ASTM C-847.
• Steel conforms to ASTM A-366.

• Galvanized #1.75, #2.5 and #3.4 Metal Lath

• Conforms to ASTM C-847.
• Galvanized in accordance with ASTM A-924, G-60.

• Diamond Mesh, 3/8 High Rib and Flat Rib

• Conforms to ASTM C-841 and ASTM C-1063 for installation.
• Conforms to Uniform Building Code, Section  4701-A, 4705-C and Table 47-B.

• Black Asphalt Mesh D Paper

• Meets Federal Specification UU-B790A Style 2 Grade D.
• Conforms to Uniform Building Code Standard 14-1.

• Aqua Mesh B Paper

• Meets Federal Specifications UU-B-790-A, Type 1 Grade B, Style 1A.
• Meets FHA Specifications 720-H.
• Conforms to Uniform Building Code Standard 14-1 and Chapter 25 & Chapter 6.

• Pyro-Kure Mesh P-K 604 Paper

• Meets Federal Specification UU-B-790, Type 1 Grade A, Style 1a.
• Conforms to Uniform Building Code Standard 14-1 and Chapter 25 & Chapter 6.

• Metal Accessories, Corner Beads, Casing Beads, Control Joints and Sill Screeds

• Conform to ASTM C-841 and ASTM C-1063 for installation.
• Steel conforms to ASTM A-924, G-30.

• All the light gauge steel framing products manufactured by Western Metal Lath are formed from mill-certified, prime steel.
• Minimum thicknesses are for bare steel, exclusive of coating.

CERTIFICATION