 |
Wheatland TUBE COMPANY DIVISION OF JOHN MANEELY COMPANY |
Wheatland Intermediate Metal Conduit
DESCRIPTION
Wheatland Intermediate Conduit (IMC) is made from high strength flat
steel that is cold-formed and electrically welded into a uniform tube. IMC is 25% lighter
in weight than heavy wall conduit, but is still capable of being threaded. The exterior
surface is thoroughly coated with zinc applied directly to the metal so that galvanic
protection against corrosion is achieved. The interior surface is protected by a specially
formulated lubricating coating to permit easier wire pulling.
APPLICATIONS
Wheatland Intermediate Metal Conduit provides protection for
electrical conductors and cables against physical damage. It can be used on jobs where the
full thickness and protection of Rigid Steel Conduit is not needed. IMC can be used
indoors or outdoors, and underground beneath concrete or fill, wherever rigid steel
conduit is permitted. It can be used in high voltage applications (over 600 volts) and all
atmospheric conditions.
SPECIFICATIONS
Wheatland Intermediate Metal Conduit is manufactured in accordance
with the latest edition of Underwriters Laboratories Standard 1242. It also conforms to
the requirements of Article 345 of the National Electric Code, Federal Specification WW-C-
581 and ANSI C80.6, latest edition.
Wheatland Nipples Elbows & Couplings
NIPPLES ELBOWS & COUPLINGS
Wheatland has a complete line of nipples, elbows and couplings for
steel rigid conduit, EMT, IMC and aluminum conduit. For complete details about these
quality products, ask for our product bulletins.
Wheatland's nipples, elbows and couplings are warehoused at our
factory locations in Cambridge, OH and Houston, TX. Field stocks also are carried in 14
warehouses located throughout the country.
|
