CONNECTOR SELECTION KEY
Products in this catalog are divided into seven general categories.
These are identified by a color bar along the page's outer edge.
This catalog reflects changes in the allowable loads and
configurations of some Simpson Strong-Tie® Company, Inc. products. This
catalog is effective until December 31, 1999, and supersedes all information in all
earlier publications, including catalogs, brochures, fliers, technical bulletins, etc. Use
this edition as a current reference. Information on allowable loads and configurations is
updated annually.
After December 31, 1999, contact Simpson Strong-Tie for the
most current product information.
Allowable loads in this catalog are for the described specific
applications of properly-installed products. Product modifications, improper loading or
installation procedures, or deviations from recommended applications will affect connector
allowable load-carrying capacities.
Cover photos, clockwise from top:
HGA10, HSS, ABU88. BP5/8S, and Simpson Strong-Wall
™.Strong-Wall photo shows Centex Homes' construction site in Chula Vista, California.
Framer was H&R Framing Systems, Poway, CA. and Engineer was Option 1, Newport Beach,
CA.
All Flights Reserved. This catalog may not be reproduced in whole
or in part without the prior written approval of Simpson Strong-Tie®
Company. Inc.
|
