 ®
|
NAILS
|
See page 14 for Strong-Drive Screw
information.
Strong-Tie nails and structural fasteners have been developed as the
optimum fasteners for connector products. Special lengths afford economy of purchase and
installation, and depth compatibility with framing members. Nail specifications include
head size, thickness, steel and shank design, and point configuration to ensure conformity
to published values.
For pneumatic nail use, see Instructions to the
Installer, page 5.
COMPARABLE SIZES: SSN8 = N8; SS8D = 8d common;
SSN10 = N10; SS10D = 10d common; SS16D = 16d common
TO ORDER: Display Packages -- available for N8D and
N10D nails. To order, specify:
N8D MSTR CTN -- 25 display packs of 150 N8 nails.
N8D5 MST CTN -- 6 display packs of 600 N8D nails.
N10D MSTR CTN -- 25 display packs of 150 N10 nails.
N10D5 MSTR CTN -- 6 display packs of 600 N10 nails.
50lb Bulk Boxes -- available for N8, N10 and N16 nails.
| Model
No. |
Description |
Metric
Equivalent (mm) |
Finish4
|
Fasteners
per CWT |
Doug
Fir-Larch/So. Pine Allowable Loads1 |
Spruce-Pine-Fir
Allowable Loads1 |
| Light
Gauge |
3
Gauge |
Light
Gauge |
3
Gauge |
| Shear
(100) |
Gauge
|
Shear
(100) |
Shear
(100) |
Gauge
|
Shear
(100) |
| N8 |
(8d) 10-1/4" ga x
1-1/2" Smooth shank |
3.3 x 38.1 |
HDG |
15200 |
86 |
14 |
105 |
74 |
16 |
90 |
| SSN8 |
(8d) 0.131 x1-1/2"
Smooth shank |
3.3 x 38.1 |
SS |
15200 |
86 |
14 |
105 |
74 |
16 |
90 |
| SS8D |
(8d)0.131 x 2-1/2"
Smooth shank |
3.3 x 63.5 |
SS |
9400 |
92 |
20 |
131 |
80 |
18 |
112 |
| N10 |
(10d) 9 ga
x 1-1/2" Smooth shank |
3.8 x 38.1 |
HDG |
11900 |
92 |
14 |
112 |
79 |
16 |
97 |
| SSN10 |
(10d) 0.148
x 1-1/2" Smooth shank |
3.8 x 38.1 |
SS |
12200 |
92 |
14 |
112 |
79 |
16 |
97 |
| SS10D |
(10d) 0.148
x 3" Smooth shank |
3.8 x 76.2 |
SS |
6700 |
112 |
18 |
158 |
96 |
20 |
136 |
| N16 |
(16d) 8 ga x 2-1/2"
Smooth shank |
4.1 x 63.5 |
BRIGHT |
6300 |
134 |
18 |
187 |
115 |
20 |
163 |
| SS16D |
(16d) 0.162 x 3-1/2"
Smooth shank |
4.1 x 88.9 |
SS |
4400 |
134 |
18 |
187 |
115 |
20 |
163 |
| N20AN |
(20d) 0.192
x 2-1/8" Annular ring |
4.9 x 54.0 |
BRIGHT |
5500 |
145 |
14 |
174 |
125 |
18 |
152 |
| N20A |
(20d).192 x
1-3/4" Annular ring |
4.9 x 44.5 |
BRIGHT |
6300 |
119 |
14 |
140 |
103 |
18 |
122 |
| N54A |
.250x2-1/2" Annular ring
|
6.4 x 63.5 |
BRIGHT |
2700 |
167 |
14 |
188 |
145 |
18 |
164 |
| 10d common |
(10d)
0.148x3" Smooth shank |
3.8 x 76.2 |
BRIGHT |
6700 |
112 |
18 |
158 |
96 |
20 |
136 |
| 16d sinker |
0.148 x 3-1/4" Smooth
shank |
3.8 x 82.6 |
GV |
6100 |
112 |
18 |
158 |
96 |
20 |
136 |
| 12d common |
0.148 x 3 -1/4" Smooth
shank |
3.8 x 82.6 |
BRIGHT |
6100 |
112 |
18 |
158 |
96 |
20 |
136 |
1. Allowable loads are based on the 1997 NDS. Adjustments are made
for use with metal side plates, Fes = 45 ksi- Loads under light gauge are for gauges
listed through 22 gauge. Allowable loads for gauges not Indicated must be calculated
according to the code. Contact the factory for more details.
2. N16, N20, N20AN and N54A fasteners may be ordered galvanized:
specify EG; for example N16EG.
3. Metric equivalents are listed by Diameter x Length.
4. EG = electro-galvanized; HDG = hot-dip galvanized; SS = stainless
steel; Bright = no finish; Zinc = Yellow zinc dichromate; GV= Green vinyl.
5. A 16d sinker, 12d common and a 10d common have the same load
value as an SS10D. A 16d common has the same load value as an SS16D. |
