Homepage  
Search
find:
search for:
   
 
Site Navigation
News / Publications
Jobs
Service
   Add this page to Google Bookmarks
   Add this page to Mister Wong
   Add this page to del.icio.us
 
   Willamette  Wood Construction Connectors  

Wood Construction Connectors - Page 32

 

 


                ®
BC POST CAPS

CAPS & BASES

 

The BCS allows for the connection of 2-2x's to a 4x post or 3-2x's to a 6x post. Double shear nailing between beam and post gives added strength!

The BC series offers dual purpose post cap/base for light cap or base connections. MATERIAL: 18 gauge

FINISH: Galvanized

INSTALLATION:

  • Use all specified fasteners. See General Notes.
  • BCS: install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads
  • BC: install with 16d commons or 16dx2y2" joist hanger nails.
  • Not recommended for non-top-supported installations such as fences when used as a base.

CODES: BOCA, ICBO, SBCCI NER-421; ICBO 5357; Dade County FL 97-0325.03 City of L.A. RR 25076 (except BCO);

Model No. Dimensions Fasteners (Each Side) Uplift Avg Ult Allowable Loads (133 & 160)1
W1 W2 L1 L2 H1 H2 Surface A Surface B Surface C Uplift Lateral
CAPS
BC4 3-9/16 35-9/16 2-7/8 2-7/8 3 3 3-16d 3-16d 3100 980 1000
BC46 3-9/16 5-1/2 4-7/8 2-7/8 3/2 2/2 6-16d 3-16d 3100 980 1000
BC4R 4 4 4 4 3 3 6-16d 6-16d 3100 980 1000
BC6 5-1/2 5-1/2 4-3/8 2-3/8 3-3/8 3-3/8 6-16d 6-16d 4700 1050 2000
BC6R 6 6 6 6 3 3 6-16d 6-16d 4700 1050 2000
BC8 7-1/2 7-1/2 7-1/2 7-1/2 4 4 6-16d 6-16d 5600 1800 2000
BCS2-2/4 3-1/8 39-9/16 2-7/8 2-7/8 2-15/16 2-15/16 4-1 0d 3-1 0d 2697 780 1025
BCS2-3/6 4-5/8 5-9/16 4-3/8 2-7/8 3-5/16 2-15/16 6-16d 3-16d 3000 800 1495
BASES
BC40 3-9/16 3-//4 2-1/4 3-16d 4-16d 535
BC40R 4 4 3 4-16d 4-16d 535
BC460 5-1/2 3-3/8 3 4-16d 4-16d —  535
BC60 5-//2 5-1/2 3 6-16d 4-16d —  535
BC60R 6 6 3 6-16d 4-16d  —  535


1 .Allowable loads have been increased 33% and 60% for earthquake or wind loading with no further increase allowed; reduce for other load durations according to the code.


APS ALUMINUM POST STANDOFF


The APS standoff height above concrete or masonry floors or decks reduces decay at post and column ends.

MATERIAL: Cast aluminum

INSTALLATION:

  • See General Notes.
  • Attach to post before installation using four nail holes.
  • Embed rod into concrete and extend into wood member.
  • For nominal or rough sawn lumber.
Model No. Post Column Size Dimensions Allowable Down  Load2
W H
APS4 4x4 3% 3 1/4 1 780
APS5 5x5 4% 4 3/8 1 1095
APS6 6x6 ; 5% 5 1/8 1 1095
APS8 8x8 8 8 1 1/4 2655
APS10 10x10 9 3/4 1/2 3595
APS12 12x12 113/4 1/2 4530


1. Loads may not be increased for short-term loading.

2. The download is calculated based on the APS bearing area and concrete strength of 2500 psi.

Request for Information / Request a Catalog from Willamette
 
 
 
To request more information from Willamette, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Company type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     






Printable version Bookmark this page Notify a colleague or friend about this pageHome | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.



Copyright © 1996–2008 AECinfo.com