Xypex - Page 14

1.06 QUALITY ASSURANCE (Continued)

D.    Technical Consultation: The waterproofing manufacturer’s representative shall provide technical consultation on waterproofing application.

1.07 DELIVERY, STORAGE AND HANDLING

A.    Delivery: Deliver packaged waterproofing materials to project site in original undamaged containers, with manufacturer’s labels and seals intact.

1.08 PROJECT CONDITIONS

A.    Compliance: Comply with manufacturer’s product data regarding condition of substrate to receive waterproofing, weather conditions before and during installation, and protection of the installed waterproofing system.

1.09 WARRANTY

A.    Manufacturer’s Warranty: Manufacturer shall provide standard product warranty executed by authorized company official. Term of warranty shall be [specify term] years from Date of Substantial Completion.

B.    Applicator’s Warranty: Applicator shall warrant the waterproofing installation against defects caused by faulty workmanship or materials for a period of [specify term]  years from Date of Substantial Completion. The warranty will cover the surfaces treated and will bind the applicator to repair, at his expense, any and all leaks through the treated surfaces which are not due to structural weaknesses or other causes beyond applicator’s control such as fire, earthquake, tornado and hurricane. The warranty shall read as follows:

1.    Warranty: The applicator warrants that, upon completion of the work, surfaces treated with cementitious crystalline waterproofing will be and will remain free from water leakage resulting from defective workmanship or materials for a period of [specify term] years from Date of Substantial Completion. In the event that water leakage occurs within the warranty period from such causes, the applicator shall, at his sole expense, repair, replace or otherwise correct such defective workmanship or materials. Applicator shall not be liable for consequential damages and applicator’s liability shall be limited to repair, replacement or correcting of defective workmanship or materials. Applicator shall have no responsibility with respect to water leakage or other defects caused by structural failure or movement of the structure, or any other causes beyond Applicator’s control.