Xypex - Page 24

1    In sealing strip, apply one coat of Xypex Concentrate at the rate of 1.5 lb./sq. yd. (0.8 kg/m2), then fill slot to surface with Xypex Concentrate in Dry-Pac form.

2    Apply one slurry coat of Xypex Concentrate to walls and floor slab at a rate of 1.25 lb. to 1.5 lb./sq. yd. (0.65 kg to 0.8 kg/m2). After the Concentrate has set but while it is still “green”, apply a coat of Xypex Modified at the rate of 1.25 lb. to 1.5 lb./sq. yd. (0.65 kg to 0.8 kg/m2).

Note 1: For hydraulic elevators, please contact your Xypex representative for detail drawings.

Refer to Standard Specifications for further information.