| (Pull) Side Installation Yale 3300ST/3500ST Series Door Closers offer the door control of the
3300/3500 Series closers with the aesthetic appearance of a slide track application. There
is no arm or bracket projection, so the installation presents sleek lines that are not
obtrusive, resulting in reduced potential for vandalism.
The closer is surface mounted to the door's top rail and
the slide track is installed on the hinge side frame face. These closers are non-handed
and feature 50% spring power adjustment, closing speed, latch speed and backcheck
cushioning control valve adjustments. The 3300ST closers are supplied with a molded Slim
Cover. The 3500ST closers are supplied with a molded Full Cover. The 3500M-ST Series
Closer is also available and is supplied with a Full Metal Cover. The metal cover and arm
assembly can have a sprayed or plated finish. The slide track assembly is only available
in sprayed finishes. See Finishes, page 18.
Yale 3300ST/3500ST Series closers are available with either
a non-hold-open or an engage/disengage hold-open open function. Both functions, for doors
that do not swing beyond 110°, feature a spring buffered stop assembly within the track.
The range of door opening and/or hold-open is as follows:
Non-Hold-Open with Spring Buffer
85° to 110°
Non-Hold-Open without Spring Buffer
85° to 180°
Hold-Open
85° to 110°
The closer's telescoping arm and spring buffered track
assembly provide adjustment of the door opening angle and/or hold-open in 3° increments
within the ranges stated above. Hold-Open track assemblies also permit the hold-open
breakout force to be increased, by means of a hex drive adjustment screw.
Slim Cover
3300ST Series
Full Cover
3500ST Series
SIZING CHART AND DIMENSION
| MAXIMUM DOOR SIZE WOOD OR METAL
FT.IN.(METERS) |
LIST NUMBERS** |
| 3300ST SERIES MOLDED SLIM COVER |
3500ST SERIES MOLDED FULL COVER* |
| NON-HOLD-OPEN |
HOLD OPEN 85°-110° |
NON-HOLD-OPEN |
HOLD OPEN 85°-110° |
| INT.
|
EXT. |
85°-110° |
85°-180° |
85°-110° |
85°-180° |
| 2'-8'' (0.80) |
- |
3304ST |
3304ST-180 |
3314ST |
3504ST |
3504ST-180 |
3514ST |
| 3' 2'' (0.95) |
2'-8'' (0.80) |
3305ST |
3305ST-180 |
3315ST |
3505ST |
3505ST-180 |
3515ST |
| 4' 0'' (1.20) |
3' 2'' (0.95) |
3306ST |
3306ST-180 |
3316ST |
3506ST |
3506ST-180 |
3516ST |
| MAXIMUM DOOR SIZE WOOD
OR METAL FT.IN.(METERS) |
A
MINIMUM TOP RAIL |
D
MINIMUM
TOP RAILCLEAR-
ANCE |
C
TEMPLATE POSITION |
G
CLOSER LENGTH |
H
CLOSER HEIGHT |
| W/OUT DROP PLATE |
WITH 3146 DROP PLATE |
MOLD-
ED SLIM/
FULL COVER |
FULL METAL COVER |
MOLDED SLIM/
FULL COVER |
FULL METAL COVER |
MOLD
ED SLIM/
FULL COVER |
FULL METAL COVER |
MOLDED SLIM/FULL COVER |
FULL METAL COVER |
| INT.
|
EXT. |
2-1/2
(64mm) |
1-5/8 (41mm |
3-1/2 (89mm) |
4-1/8 105mm) |
5-1/8 (130mm) |
4-7/8 (124mm) |
13 (330mm) |
13-1/2 (343mm) |
2-7/8 (73mm) |
3-3/4 (95mm) |
| 2'-8'' (0.80) |
- |
| 3' 2'' (0.95) |
2'-8'' (0.80) |
| 4' 0'' (1.20) |
3' 2'' (0.95) |
*For Full Metal Cover, suffix ''M'' to the List Number,
i.e. 3504M-ST.
+ Dimensions in parentheses are millimeters unless noted
otherwise.
**Sizing based upon standard weight and size 7'0'' (2.15m)
door hung on ball bearing hinges. Larger doors or doors exposed to severe winds or drafts
unusually require the next size closer. |
