| (Push) Side Installation Yale P3300ST/P3500 Series Door Closers offer the door control of the
3300/3500 Series closer with the aesthetic appearance of a slide track application. There
is no arm or bracket projection, so the installation presents sleek lines that are not
obtrusive, resulting in reduced potential for vandalism.
The closer is surface mounted to the door's top rail and
the slide track is fastened to the the frame soffit. These closers are non-handed
and feature 50% spring power adjustment, closing speed, latch speed and backcheck
cushioning control valve adjustments. The P3300ST closers are supplied with a molded Slim
Cover. The P3500ST closers are supplied with a molded Full Cover. The P3500M-ST Series
Closer is also available and is supplied with a Full Metal Cover. The metal cover and arm
assembly can have a sprayed or plated finish. The slide track assembly is only available
in sprayed finishes. See Finishes, page 18.
Yale P3300ST/P3500ST Series closers are available with
either a non-hold-open or an engage/disengage hold-open function. Both functions, for
doors that do not swing beyond 100°, feature a spring buffered stop assembly within the
track. The range of door opening and/or hold-open is as follows:
Non-Hold-Open with Spring Buffer
85° to 110°
Non-Hold-Open without Spring Buffer
85° to 125°
Hold-Open
85° to 100°
The closer's telescoping arm and spring buffered track
assembly provide adjustment of the door opening angle and/or hold-open in 3° increments
within the ranges stated above. Hold-Open track assemblies also permit the hold-open
breakout force to be increased, by means of a hex drive adjustment screw.
| Slim Cover 
P3300ST Series |
Full Cover 
P3500ST Series |
SIZING CHART AND DIMENSIONS+
| MAXIMUM
DOOR SIZE WOOD OR METAL FT.IN.(METERS) |
LIST NUMBERS** |
| P3300ST SERIES
MOLDED SLIM COVER |
P3500ST SERIES
MOLDED FULL COVER* |
| |
NON-HOLD-OPEN |
HOLD
OPEN 85°-100° |
NON-HOLD-OPEN |
HOLD OPEN 85°-100° |
| INT.
|
EXT. |
85°-100° |
85°-125° |
85°-100° |
85°-125° |
| 2'-8'' (0.80) |
- |
P3304ST |
P3304ST-125 |
P3314ST |
P3504ST |
P3504ST-125 |
P3514ST |
| 3' 2'' (0.95) |
2'-8'' (0.80) |
P3305ST |
P3305ST-125 |
P3315ST |
P3505ST |
P3505ST-125 |
P3515ST |
| 4' 0'' (1.20) |
3' 2'' (0.95) |
P3306ST |
P3306ST-125 |
P3316ST |
P3506ST |
P3506ST-125 |
P3516ST |
| MAXIMUM
DOOR SIZE WOOD OR METAL FT.IN.(METERS) |
A
MINIMUM
TOP RAIL |
D
MINIMUM TOP
RAIL CLEAR-
ANCE |
C
TEMPLATE POSITION |
G
CLOSER LENGTH |
H
CLOSER HEIGHT |
| W/OUT DROP PLATE |
WITH 3148 DROP PLATE |
MOLDED SLIM/
FULL COVER |
FULL METAL COVER |
MOLDED SLIM/
FULL COVER |
FULL METAL COVER |
MOLDED SLIM/
FULL COVER |
FULL METAL COVER |
MOLDED SLIM/
FULL COVER |
FULL METAL COVER |
| INT.
|
EXT. |
5 (127mm) |
2-3/4 (70mm) |
6 (152mm) |
6-5/8 (168mm) |
7/8 (22mm) |
5-8 (16mm) |
13 (330mm) |
13-1/2 (343mm) |
2-7/8 (73mm) |
3-3/4 (95mm) |
| 2'-8'' (0.80) |
- |
| 3' 2'' (0.95) |
2'-8'' (0.80) |
| 4' 0'' (1.20) |
3' 2'' (0.95) |
*For Full Metal Cover, suffix ''M'' to the List Number,
i.e. P3504M-ST.
+ Dimensions in parentheses are millimeters unless noted
otherwise.
**Sizing based upon standard weight and size 7'0'' (2.15m)
door hung on ball bearing hinges. Larger doors or doors exposed to severe winds or drafts
unusually require the next size closer. |
