 POWER TRACK FEATURES
Master Unit
Integral Smoke Detector
Dual Chamber lonization Sensing: Detector
employs dual ionization chambers to substantially reduce the probability of false alarms
Fire/Smoke Control Circuit: Interprets the
alarm signal from the detector and provides switching contacts to interrupt power to the
hold-open solenoid and divert it to activate optional audio/visual alarms.
Alarm (Relay) Contacts : Normally open in
standby condition (energized, non-alarm state). These contacts close during an alarm
condition (smoke detected) and switch power from the solenoid to an optional local alarm.
Trouble (Relay) Contacts: Normally closed
in standby condition, these supervisory contacts monitor the continuity of power within
the detector circuit. Any power interruption within the detector circuit will open these
contacts. They can then be used to simultaneously indicate a Trouble Condition to the
Alarm panel on a separate trouble circuit.
Quick Disconnect Modules: Each component,
solenoid coil, detector and controls, features quick disconnect wiring for easy servicing
and replacement.
Locked-in Alarm: When a unit alarms, it
must be manually reset. This can be accomplished by remote control from the alarm console
or by the reset button in the smoke detector. Reset button is accessible through hole in
the underside of the track.
Alarm Light: A red LED is illuminated when
the detector goes into the Alarm Condition (smoke detected). This light is easily visible
from the underside of the track which makes an alarmed unit easy to identify.
Pilot Light: A green LED easily visible
from the underside of the track is illuminated at all times except when a Trouble
Condition is sensed. Indicates at a glance whether or not the unit is energized.
Door Closers
400 Series Power Track: Combines a 405
door closer with the Power Track Closer-Holder assembly. The 400 Series door closer is a
modern, non-handed, narrow projection closer enclosed in a 3-7/8" (98mm) high x
2-1/8" (54mm) deep x 13-5/8" (348mm) long molded cover. It has 50% spring power
adjustment capability. It also features four independent regulating valves for controlling
closing speed, latch speed, backcheck cushioning and backcheck position.
3200 Series Power Track: Combines a 3205BC
door closer with the Power Track Closer-Holder assembly. The 3200 Series door close is a
modern, non-handed, narrow projection closer enclosed in a 1-3/4" (44mm) high x
2-1/8" (54mm) deep x 13" (330mm) long molded cover. It has three independent
regulating valve for the adjustment of closing speed, latch speed and backcheck
cushioning.
3300 Series Power Track: Combines a 3305
door closer with the Power Track Closer-Holder assembly. The 3300 Series door closer is a
modern, non-handed, narrow projection closer enclosed in a 1-3/4" (44mm) high x
2-1/8" (54mm) deep x 13" (330mm) long molded cover. It has 50% spring power
adjustment capability. It also features three independent regulating valves for the
adjustment of closing speed, latch speed and backcheck cushioning.
3400 Series Power Track: Combines a 3405BC
door closer with the Power Track closer with the Power Track Closer-Holder assembly. This
closer has the same features as the 3205BC Closer but it is enclosed in 2-7/8" (73mm)
high x 2-1/8" (54mm) deep x 13" (330mm) long molded cover.
3500 Series Power Track: Combines a 3505
door closer with the Power Track Closer-Holder assembly. The 3500 Series door closer is a
modern, non-handed, narrow projection closer enclose in a 2-7/8" (73mm) high x
2-1/8" (54mm) deep x 13" (330mm) long molded cover. It has 50% spring power
adjustment capability. It also features three independent regulating valves for the
adjustment of closing speed, latch speed and backcheck cushioning. |
