 4220/4230 SERIES MASTER UNITS
Push (Stop) Side Mounting Double Lever Arm
Master Units with Integral Smoke Detector
Series 4220MPDI/4230MPDI: Infinite Hold-Open
Series 4220MPDS/4230MPDS: Selective Hold-Open
Executive™ Door Holder/ Release
Series 4220RFI/4230RFI: Infinite Hold-Open
Series 4220RFS/4230RFS: Selective Hold-Open
Single Doors
Master Units with Integral Smoke Detector: Both
Series 4220MPDI/4230MPDI or series 4220MPDS/4230MPDS are self-contained and can be
installed to control a single door.
Executive™ Door Holder/Release: Both
Series 4220RFI/4230RFI and Series 4220RFS/4230RFS are self-contained and can be
installed to control a single door.
Pairs of Doors
Master Units x Slave Unit: Smoke Detector
in the Master Unit controls the closer-holder solenoids and the solenoid in the Slave
Unit.
Master Unit x Tandem Unit: Smoke Detector
in the Master Unit signals conditions (stand-by, Trouble / Alarm) to an alarm systems
panel. This panel controls the signal to the hold-open solenoids in both the Master Unit
and the Tandem Unit.
Executive Door Holder x Slave Unit: Consult
the factory for details of this installation.
These Closer-Holders are surface mounted to the push (stop)
side frame face. The standard mounting for these units require a minimum ceiling clearance
of 3-1/2" (89mm). Where ceiling clearance is between 2" and 3-1/2" (51mm
and 89mm) , the standard backplate for the 4220 Ser3ies or 4230 Series can be inverted to
allow for a drop application. Use of a No. 4299 decorative backplate is recommended to
conceal the exposed mounting holes on the standard backplate. Different mounting
dimensions are required for the drop application. The double lever arm mounts directly to
the door,. These units can be installed to accommodate door openings to 180º with a 170º
maximum hold-open point.
Door Sizes and List Numbers
| MAXIMUM* DOOR SIZE
FT.IN. (METERS) |
MASTER UNIT
CLOSER-HOLDER |
EXECUTIVE DOOR
HOLD/RELEASE |
MAXIMUM DEGREE OF
DOOR OPENING |
REVEAL RANGE
INCHES (MILLIMETERS) |
| INFINITE HOLD-OPEN |
SELECTIVE HOLD-OPEN |
INFINITE HOLD-OPEN |
SELECTIVE HOLD-OPEN |
| 3"-6" (1.10) |
4223MPDI |
4223MPDS |
4223RFI |
4223RFS |
180º |
2-3/4-4 (70-102) |
| 165º |
4-7 (102-179) |
| 4233MPDI |
4233MPDS |
4233RFI |
4233RFS |
180º |
4-7 (102-179) |
| 4"-0"(1.20) |
4224MPDI |
4224MPDS |
4224RFI |
4224RFS |
180º |
2-3/4-4 (70-102) |
| 165º |
4-7 (102-179) |
| 4234MPDI |
4234MPDS |
4234RFI |
4234RFS |
180º |
4-7 (102-179) |
| MINIMUM* DOOR SIZE FT.IN. (METERS) |
FOR DOOR OPENING OF |
| 2' - 4" (.70) |
180º |
| 2"2" (.65) |
100º TO 180º |
Electrical Data Master Units
| MASTER UNIT LIST NUMBER |
NUMBER POWER INPUT LINES*
(PAIRS) |
OPERATING VOLTAGE (INPUT) |
AMPERAGE DRAW (AMPERES) |
(CAN BE) USED IN CONJUNCTION
WITH MASTER UNIT |
| SMOKE DETECTOR |
SOLENOID COIL |
| STANDBY |
ALARM |
| 4220MPDI-24 4230MPDI-24 |
1 |
24VAC/DC |
.016@ 24VDC |
.035@ 24VDC |
.070@ 24VDC |
SLAVE UNIT 4220MPSI SLAVE UNIT 4230MPSI |
| 4220MPDS-24 4230MPDS-24 |
SLAVE UNIT 4220MPSS SLAVE UNIT 4230MPSS |
| 4220MPDI-120 4230MPDI-120 |
1 |
120VAC |
.070@ 24VDC |
SLAVE UNIT 4220MPSI SLAVE UNIT 4230MPSI |
| 4220MPDS-120 4230MPDS-120 |
SLAVE UNIT 4220MPSS SLAVE UNIT 4230MPSS |
| 4220MPDI-240x120 4230MPDI-240x120 |
2 |
24VAC/DC |
.035@ 24VDC |
TANDEM UNIT 4220MPTI TANDEM UNIT 4230MPTI |
| 4220MPDS-240x120 4230MPDS-240x120 |
TANDEM UNIT 4220MPTS TANDEM UNIT 4230MPTS |
Electrical Data Door Holder/Release
| TYPE OF UNIT &
LIST NUMBER |
NUMBER POWER INPUT
LINE* (PAIRS) |
OPERATING VOLTAGE |
AMPERAGE
DRAW (AMPERES) |
| SOLENOID COIL |
INTERRUPTING SWITCH |
| 4220RFI -120 4230RFI -120 |
1 |
120VAC |
.070 @ 24VDC |
.015 @ 210VAC |
| 4220RFS -120 4230RFS -120 |
1 |
*Pairs of input lines required to supply Operating Voltage
or Voltages to the unit. Pairs listed do not include signal wires to Alarm Panels nor
control wires to other units' solenoids.
Maximum / Minimum Operating Voltage Parameters: = 10%; -15% |
