 4200 SERIES WIRING
Support Unit with either 24VAC/DC or 120VAC Power
Input from Alarm/Detector Circuit Tandem unit with 120VAC Power Input from Alarm/Detector
Circuit
Slave Unit with 24VDC Input from Master Unit
Notes:
All relay contacts rated 0.5 Amps @ 125VAC 60Hz; 2.0 Amps@
30 VDC.
Detector Sensitivity is factory set and can only be
recalibrated by factory authorized personnel.
Detector Environmental Limits: 100ºF (38ºC); 95% Relative
Humidity. Cannot be installed in environments with a high concentration of corrosive
vapors or where air velocity exceeds 300 ft. per min. (91M./min.).
Maximum wire size for Input/System Terminal Strip is 14
A.W.G. Maximum/Minimum Operating Voltage Parameters: +10%, -15%. |
