5300 Standard Duty Cylindrical Locksets - Page 2

A member of the Yale Security Group

UL Listing

5300 Series Locksets have been listed by Underwriters' Laboratories,  Inc. as single point locks or latches for use on fire doors having a rating up to and including 3 hours. In general, these locksets with 1/2'' throw latchbolts may be used on single-swing doors (not exceeding 4 feet in width and 8 feet in height) of hollow-metal, metal-clad (Kalamein) composite (with steel and other coverings) and wood door type construction. It is advisable to check local authorities, the "Building Materials Directory'' published by UL, and the door manufacturer for specific hardware requirements. Underwriters Laboratories does not list locks with drive-in latchbolts, rabbeted fronts or hold-back feature on the latchbolt.

Yale 5300 Series Standard-Duty Cylindrical Locksets offer a unique combination of positive security, trim design variety and quality construction. They are designed for residential and various commercial applications and are the choice of engineers worldwide.

The 5300 Series key-in-knob locksets provide Yale pin-tumbler cylinder security. The locks are  available in  a wide choice of keying options: keyed different, keyed alike, construction keying and master-keying including hotel/motel guests room keying. They can also be supplied to be compatible with other Yale keyed security systems.

Yale 5300 Series Locksets are available in a wide variety of functions, trim designs and finishes. A selection can easily be made to meet the intention of most any designer or engineering/security specialist.

The locksets reflect the many years of Yale engineering experience as well as recent innovations. Yale locsets are built to last.

ANSI Standards

Yale 5300 Series Locksets confirm to ANSI Spec. A156.2 - Series 4000 Grade 2, and can be installed on doors prepared to ANSI Spec. A115.2 - which covers Hollow Metal Doors and Frame preparation for Cylindrical Locksets.

ANSI A117.1

Specification for accessible and usable buildings and facilitates no longer require tactile warnings for door operating hardware.

Split Finishes - When locksets with different trim finishes on each side are required, specify outside finish first. Example: LF5301 US3 x US26. Front and Strike finish to match inside trim unless otherwise specified.