 A member of the Yale Security Group
Yale 5400/5500 locksets are supplied with a standard
strike or a variety of optional strikes. All strikes are located on the same vertical and
horizontal center lines as the latchbolt.Some strikes are available in a variety of
special lip lengths to accommodate varying thickness of doors and frames. To determine the
proper length of the lip, measure from the center line of the door to the edge of the
jamb, plus for any interfering trim (i.e. wood molding and then add 1/4" (25mm) for
curved lip). All strike are reversible. Strikes are fabricated of either
brass, bronze or stainless steel depending on the lockset trim finish. When
ordering strikes separately, specify the finish required.
| Standard Strike List
No.497 |
Strike for door and frames with ANSI A115.2
Preparations. Available to special order.
Optional Open Back Strike List No. 496
Optional Protected Back Strike List No. 431
Optional Strike List No. 495
Optional List No. 202 Wrought Strike Box for ANSI
Strike.
Available to special order. Specify 497 x 202.
Attaching Screws (Not regularly supplied when Strike
ordered separately).
For List No's. 495, 495M, 495-1/2" (13mm). 431
and 496 Strikes - # 8-8-32 x 3/4" (19mm) Phillips Flat Head
Combination Wood and Machine Screw P/N-81-201209416
For List No's. 497 and 499 Strikes and 497B Plate -
#12-12-24 x 1" (25mm) Phillips Flat Head
Combination Wood and Machine Screw P/N-81-2012-0620.
Note: When ordering strike plates or attaching screws
individually, specify the finish required; i.e. 497 202 US10; #81-2012-0620 x US10.
Standard Marine Strike
List No. 495M 1-1/4" (32mm)
Standard Rabbeted Strike
List No. 495-1/2" x 1-1/4" (32mm) Lip supplied
standard with all 5400/5500 locksets when ordered with rabbeted latchbolts.
|
