 A member of the Yale Security Group
| ELECTRIFIED EXIT DEVICE |
7000 |
The Yale 7000 Exit Device Series offers a complete
range of electrical options:
- Latch Pullback
- Electric Dogging
- Mortise Device Trim Control
- Touchbar Monitor or Signaling
- Outside Trim monitor or Signaling
- Bolt Position Monitor or Signaling
A continuum in appearance, security and functions
with the 7000 Series mechanical exit device is maintained.
The 7000 Electrified Exit Devices may be integrated
into the monitoring security and alarm systems of most buildings.
| Ordering |
| Suffix "P" to the List Number: |
| Operation |
| Latch Pullback provides a remote means of
unlocking exit devices. |
| Continuous duty solenoids retract the bolt(s)
for momentary or maintained periods of time. |
| Application: |
| Rim Exit Devices |
| Concealed Vertical Rod Exit Devices |
| Surface Vertical Rod Exit Devices |
| Mortise Exit Devices |
| SquareBolt Exit Devices |
| Listings: |
| UL listed for both Panic and Fire Exit
Hardware. |
| Electrical Specifications: |
| Requires 781 Controller (120VAC input, output
for up to two sequential or individual exit devices), and 4-wire electrical pivot or hinge
by others. |
| Solenoid: |
| 5.5 volt solenoid with 36 volt holding magnet
(.172 Amp) |
| 14 Amp in rush @ 24VDC |
| .172 Amp holding-continuous duty. |
| Device bolts remain retracted for as long as
the device is energized. Removal of power returns the device to the life safety,
self-latching mechanical mode. Easy interface with central or local fire alarm system,
automatic door operators, magnetic door locks, electric strikes, and access control
systems. |
| Ordering |
| Suffix "G" to the List Number: |
| Operation |
| Electric dogging feature provides continuous
latch retraction and touchbar dogging simultaneously. When power is applied to the exit
device, depressing the pushbar will continuously hold the pushbar down and the latchbolt
retracted in the unlocked position. Removal or interruption of power will release the
pushbar and the latch will extend. |
| Application: |
| Rim Exit Devices |
| Concealed Vertical Rod Exit Devices |
| Surface Vertical Rod Exit Devices |
| Mortise Exit Devices |
| SquareBolt Exit Devices |
| Listings: |
| UL listed for both Panic and Fire Exit
Hardware. |
| Electrical Specifications: |
| .35 Amps @ 24VDC - continuous duty |
| (2) 36 volt holding magnets holding force
(86Lbf. total) |
| Requires a 2-wire thru wired pivot or hinge,
and a standard 24VDC power supply. |
|
