7000 Series Architectural Exit Devices - Page 16

A member of the Yale Security Group

The 780 Power Supply provides 2amps of output current at 24VDC. It can control a total of 5 Electric Dogging Devices or "Safe" or "Secure" Mortise Exit Devices. Separate switching devices (key switches or pushbuttons) must be used to control locking devices in the circuit.

Specifications

• 120VAC Input Power
• 24VDC @ 2 Amp Output
• Fire Alarm Interface

9231 - (1) SPDT Maintained

9232 - (1) SPDT Momentary

Options:

• 1-3/4" Narrow face plate (suffix "N")
• L2 suffix - two LEDs (red and green)

Specifications;

• Keyswitch for operation using a standard 1-1/4" mortise cylinder (Cylinder not included).
• Contact Rating 10 Amps @ 120VAC, or 28VDC.
• SPDT 3-position

The 781 Controller is designed to control one or two electric Latch Pullback devices. Operation can be set for sequential or individual control of doors. When using a momentary normally open contact switch, the latch pullback delay time feature can be adjusted from 1 to 20 seconds, providing an put to interface with automatic door operator controllers.

Listing

Listed as an Exit Device Control Unit to UL 294 requirements.

Specifications

120VAC 60HZ Power Input 14 Amp inrush for 100 milliseconds, Holding voltage @ 28 volts .180 Amp

Circuit Wiring

Up to 40 feet: 16 AWG wire.

Up to 60 feet: 14 AWG wire.

Up to 100 feet: 12 AWG wire.

All wiring must be stranded.

9411 - (1) SPDT Momentary

9412 - (1) SPDT Maintained (Alt. Action)

9511 - (1) SPDT Momentary

TS9271 - (1) SPDT Maintained

Option:

• L2 - two LEDs (red and green)

Specifications:

• SPDT form Z contact
• 9400 - Rated 6AMP @ 120VAC
• 9500 - Rated 12AMP @ 120VAC
• TS9271 SPDT 3 position - Rated 6AMP @ 120VAC
• 9500 Push button size - 1-9/16' (40mm) diameter.

3271 - Sonalert 90Db @ 2ft. 12/24VDC

Mounted on one  gang stainless steel plate.

3251-L2 - Two LEDs mounted on one gang stainless steel plate. 12/24VDC (red and green)