ACCESSORIES FOR SURFACE CLOSERS
Drop Plates & Brackets for Parallel Arm
Installation
Narrow Top Rail #478 - Drop Plate: For use
where a narrow top rail prevents the closer from being mounted directly to the door
surface. This drop Plate can be used to mount a closer on a top rail as narrow as 2-1/2''
(64mm) in height.
Clearance/Super Block #293S Spacer Block:
For use where a narrow frame soffit does not provide adequate support for the soffit
plate. Supplied as standard with all parallel rigid arm closers.
Narrow Frame - #890 Support Bracket: For use where the frame is narrow,
and the soffit plate cannot be mounted directly to the frame soffit or rabbet. Used in
combination with the #891 Space Block on blade stop frames to provide extra support and
needed clearance of the blade stop.
Clearance/Support Blade Stop -#891 Spacer Block: For
use where the door frame has a blade stop and the soffit plate must be mounted on the
frame rabbet. This accessory is used in combination with the standard Spacer Block to
Provide clearance of the blade stop.
Flush Rabbeted Transom -#293L Angle Bracket: For
use where flush transom conditions prevent mounting of the standard soffit plate. This
bracket is used in combination with the standard soffit plate.
TORX screw fasteners are highly tamper-resistant. They are
provided with all security closers and closers with security arms only. Screws require a
hex-lobular drive which mates to security pin in screw head. Three different size bits are
available along with a TORX handle.
TORX® is a registered trademark of Textron, Inc. |
