Architectural Specifications. CSI 3-Part Specifications.

Regal Mfg. Co.
2235 S.E. 11th Ave.
Portland, OR 97214
(503)230-0444 

ARCHITECTURAL SPECIFICATIONS:

PART 1 GENERAL

1.01 SUMMARY

A. Section Includes: Sliding Mirror Doors by Regal Manufacturing Company (IMAGE 1100, 1101, 1120, 1121).

B. Related Work By Others: Framed openings, including wood and steel components except fasteners connecting manufacturer supplied components.

1.02 WARRANTY

A. Regal Manufacturing Company warrants its products to be free of significant defects in materials or workmanship for one year from shipment date. (Actual Warranty text provided as part of each invoice.)

PART 2 PRODUCTS

2.01 MATERIALS

A. MANUFACTURER: Regal Manufacturing Company, a Division of Arcorp, Inc., P.O. Box 14578, Portland, Oregon, 97214, USA. Telephone: (503)230-0444, (800)627-3327, Fax: (503) 230-0446.

B. Panel Frame Members and top and bottom tracks: Aluminum 6063-T5 extrusions, complying with ASTM B-221. Reversible channel head, with 1" vertical adjustment. Models:

1. IMAGE 1100: 5/8" wide stiles; fluted exposed surface on rails.
2. IMAGE 1101: 5/8" wide stiles; flat exposed surface on rails.
3. IMAGE 1120: 1 5/8" wide fluted stiles; fluted exposed surface on rails.
4. IMAGE 1121: 1 5/8" wide fluted stiles; flat exposed surface on rails.
5. Top track provides both a fluted and a flat face for versatility.
6. Bottom track is smoothly contoured for easy cleaning.

C. Panel Glazing:

1. Standard Glazing: Clear, 4mm thick float mirror with protective backing. (Other thicknesses, special colors and patterns, available on special order.)
2. Mirror and Backing: Tested and in compliance with ANSI Z97.1-1975 and UBC (1982) 54-2.

   a. Category 1: Reach-in applications only. (All doors)
   b. Category 2: Reach-in or passage applications. (Verify with Mfg. for doors to meet Category 2.)

D. Hardware and Accessories

1. Fasteners: Steel screws, countersunk in pre-punched installation holes.
2. Glazing Channel: Color compatible glazing vinyl and removable, replaceable, reusable, rubber bumpers.
3. Roller Assemblies: Heavy duty, steel construction, patio door type, nylon tire ball bearing rollers with 1/4" vertical adjustment.
4. Top Guides: Anti-rattle vinyl top guides.
5. Door Pull: Full length finger groove.

E. Finishes:

1. Standard colors:

   a. Door Models 1100 and 1101: Champagne (Satin) Gold Anodized; Bronze (Satin) Anodized; Clear (Satin) Anodized.
   b. Door Models 1120 and 1121: Champagne (Satin) Gold Anodized; Bronze (Satin) Anodized.
   c. All visible screws and accessories shall be color coordinated with frame finish.

2. Custom Colors: (Custom colors and finishes available on special order basis.)

2.03 FABRICATION

A. Shop Pre-Assembly:

1. Fabricate to sizes and configurations indicated on Drawings. (Refer to Manufacturer's Size Table for standard sizes.)
2. Mechanically join corners of panel frames with countersunk, plated steel screws.
3. Provide each panel with two adjustable bottom roller assemblies which, in combination with deep channel head, shall provide total of up to 1¼" vertical adjustment.

PART 3 EXECUTION

3.01 INSTALLATION

A. Preparation: Examine openings for sliding doors prior to commencing installation. Notify Architect, in writing, if conditions detrimental to proper installation exist. Do not begin installation until such conditions are corrected.

B. Install sliding mirror doors in accordance with Contract Documents and Manufacturer's printed Installation Instructions supplied with doors.