74-2771:XLS200 & 1000 F&S Interface. CSI 3-Part Specifications.

FEATURES

• Interface between XLS200/1000 systems and:
  —  Existing W7053 series Bus Interface
  —  MPCP board in an XBS system
• Easy upgrades from existing systems
• Connects XLS200/1000 to F&S bus
• XLS200/1000 can co-exist with FS90 on F&S bus
• XLS200/1000 data file easily converts to F&S bus protocol

GENERAL

The Excel Life Safety (XLS) 200/1000 Fire & Security Bus Interface (F&S Bus Interface) connects XLS200/1000 panels to a F&S bus in the following configurations:

—  an existing W7053 series Bus Interface
—  a MPCP board within an Excel Building Supervisor (XBS) point server (XBS Ver. 1.3.3 or later).

The F&S Bus Interface (14507532-001) allows an existing F&S bus with FS90 Plus panels to be upgraded with XLS200/ 1000 panels. Existing sites do not need to change workstations or install an additional communications bus. The F&S Bus Interface allows new (XLS) and existing (FS90 Plus) fire panels to reside on a common F&S bus.

The F&S Bus Interface consists of a microprocessor-based, real-time function board that mounts in the XLS200/1000 enclosure. The board receives power from the XLS panel and requires no separate power supplies or battery backup. The F&S Bus Interface supports the existing F&S bus fiber optic interface for sites that require fiber optic transmission capabilities.

The data file EPROM software for the F&S Bus Interface is created using Computer Assisted Engineering (CAE). A conversion utility greatly simplifies the generation of the data file by extracting information from the XLS System Definition Utility (SDU) and creating a batch text file which inputs to the CAE environment.

SPECIFICATIONS

Model:

• 14507532-001 XLS200/1000 F&S Bus Interface.

Mounting:
In CAB7 Lobby Enclosure or RCC7 Remote Closet Cabinet or larger, F&S Bus Interface board occupies a full footprint.
In CAB5 Lobby Enclosure, F&S Bus Interface board
mounts to inside of inner dead-front door using 14507606-001 Mounting Bracket.

Capacities:
29 panel addresses per F&S bus.
1500 points total per F&S bus.
Maximum of one XLS200/1000 panel reporting through the F&S Bus Interface.
Maximum of 967 points per XLS1000 (same as to FS90 Plus).
Addressable loops on the XLS panel are limited to 100 sensors and 99 modules, and devices that can be mapped over to the workstation.

Connections:
RS-232 connection for XLS panel CPU.
RS-485 redundant connection for F&S Bus.
Power connection to XLS panel power supply.

Wiring:
Terminal Wiring Gage: 18 to 14 AWG (0.8 to 2.0 mm 2
Class A or B.

Electrical Characteristics:
Operating Voltage: 24V dc at 75 mA
Operating Standby Current: 75 mA
Operating Alarm Current: 75 mA

Maximum F&S Bus Circuit Ratings:
Resistance: 50 ohm max
Capacitance: 0.1 max

Shipping Weight:
1.5 lb (0.68 kg)

Accessories:
14507606-001 Mounting Bracket for mounting F&S Bu
Interface in CAB5 Lobby Enclosure only. (Bracket
Assembly not needed for larger enclosures.)

Home and Building Control
Honeywell Inc.
Honeywell Plaza
P.O. Box 524
Minneapolis, Minnesota 55408-0524

Honeywell Latin American Division
480 Sawgrass Corporate Parkway
Suite 20
Sunrise FL 33325

Home Building Control
Honeywell Limited - Honeywell Limitée
155 Gordon Baker Road
North York, Ontario
M2H 3N7

Honeywell Europe S.A.
3 Avenue du Bourget
B-1140 Brussels
Belgium

Honeywell Asia Pacific Inc.
Room 3213-3225
Sun Hung Kai Centre
No. 30 Harbour Road
Wanchai
Hong Kong

74-2771   L.A. 6-97

Helping You Control Your World®