|
|
 |
Excel 10
Q7752A SERIAL INTERFACE |
SPECIFICATION DATA |
GENERAL
The Excel 10 Q7752A Serial Interface or Serial LonTalk® Adapter (SLTA) is a
complete network interface unit that includes all of the required hardware and software to
execute network operations for a twisted pair E-Bus network. Use the standard power supply
or battery included for the SLTA with a portable operator terminal (PC) to perform network
operations by connecting the SLTA via the SLTA connector cable to the E-Bus port on Excel
10 controllers or wall modules. For permanent installations, use a mounting bracket to
wall mount the SLTA.
FEATURES
- Electronics Industry Association (EIA) standard
RS-232C Interface.
- 1200 to 115,200 bits per second (bps) serial bit
rate with autobaud detection.
- Uses E-Bus network protocol.
- E-Bus communicates through a 78 kilobit transformer
coupled transceiver.
- Transformer-coupled communications interface offers
much higher degree of common mode noise rejection while assuring DC isolation.
- Built-in power management and rechargeable battery.
DESCRIPTION
The Excel 10 Q7752A Serial Interface or Serial LonTalk® Adapter (SLTA) is a
complete network interface unit that includes all the required hardware and software to
execute network operations for a twisted pair E-Bus network. Use the standard power supply
or battery included for the SLTA with a portable operator terminal (PC) to perform network
operations by connecting the SLTA via the SLTA connector cable to the E-Bus port on Excel
10 controllers or wall modules. For permanent installations, use a mounting bracket to
wall mount the SLTA.
SPECIFICATIONS
The SLTA is a one-piece construction,
externally wired device. The SLTA is connected via the SLTA connector cable, part number
205979, to the E-Bus port on Excel 10 controllers or wall modules.
Power Supply
The standard power supply is 9V at 500 mA with
the connection plugs outer barrel positive (+) and the tip negative (-). Power On LED is
located on the back of the Q7752A SLTA.
Transceiver Type:
The SLTA uses a transformer isolated,
differential Manchester transceiver.
Status Information:
Service (LED) on the back of the SLTA provides
status information.
A service request button for broad-casting the neuron ID on
the E-Bus, is located on the back of the SLTA.
Mounting Options:
For permanent installations, the SLTA can be
wall mounted using an SLTA mounting bracket. See Excel 10 Q7752A Serial Interface
Installation Instructions, form 95-7511, for details.
Dimensions (H/W/D):
1-5/32 x 3-29/32 x 6-1-/32 in. (29.5 x 99 x
168 mm).
Environmental Ratings:
Operating Temperature
32 to 131° F (0 to 55° C).
Shipping Temperature
-4° to 150° F (-20° to 65° C).
Relative Humidity
Operating
25% to 95% relative humidity at 104° F (40° C).
Non-operating
90% relative humidity at 150° F (65° C).
Approval Bodies:
The SLTA is listed under the EMI Compliance
for the FCC Part 15 Level B. For Safety Compliance, the SLTA is listed under UL 1784, CSA,
TUV.
|
|
Helping You Control Your
World®
|
Home and Building Control
Honeywell Inc.
Honeywell Plaza
P.O. Box 524
Minneapolis, MN 55408-0524 |
Home and Building Control
Honeywell Limited - Honeywell Limitée
155 Gordon Baker Road
North York, Ontario
M2H 3N7 |
Honeywell Asia Pacific Inc.
Room 3213-3225
Sun Hung Kai Centre
No. 30 Harbour Road
Wanchai
Hong Kong |
Honeywell Latin American Division
480 Sawgrass Corporate Parkway
Suite 200
Sunrise, FL 33325 |
Honeywell Europe
3 Avenue du Bourget
1140 Brussels
Belgium |
74-2954 11-94
