Product Specifications Guide Special Accessories. CSI 3-Part Specifications.

PRODUCT SPECIFICATIONS:  SECTION 10650 SPECIAL ACCESSORIES FOR FOLDING PARTITIONS

PART 1 GENERAL

(See Project Guide Specifications for Scope, Related Work, References, Submittals, Product Delivery and Acceptable Manufacturers paragraphs.)

PART 2 PRODUCTS

2.1 SPECIAL ACCESSORIES shall be as manufactured by Panelfold, Inc., Miami, Florida, U.S.A. and installed by an authorized representative of the manufacturer in openings prepared by others to Panelfold folding partitions requirements.

2.2 SPECIAL ACCESSORIES shall be furnished and installed as follows to provide multiple purpose uses as shown on the plans:

2.2.1 Meeting Post, 2-Way
2.2.2 Meeting Post, 3-Way
2.2.3 Meeting Post, 4-Way
2.2.4 Curved Track
2.2.5 Standard Curved Switch
2.2.6 Double Curved Switch
2.2.7 Double Curved Switch with Cross-Over
2.2.8 Cross-Over Switch

2.3 TRIM: Curved track and/or curved switches shall be supplied with (specify: track mould or Ceilinguard to conceal track, or optional extruded aluminum sub-channel for recessed track).

PART 3 EXECUTION

(See Project Specifications Guide for Execution, Inspection, Preparation, Installation, Cleaning and Demonstration paragraphs.)

Panelfold^®
FOLDING DOORS - ACOUSTICAL FOLDING PARTITIONS - OPERABLE WALLS - RELOCATABLE WALLS
Panelfold, Inc. PO Box 680130 Miami, Florida 33168
305/688-3501 - FAX: 305/688-0185
Panelfold is constantly developing its products and reserves the right to change specifications without notice. Copyright© 1998 by Panelfold, Inc. All rights reserved.