Classic Series Installation Instructions
1. For New Construction, follow steps a through c. For Renovation (existing T-Grid ceiling) follow steps d through g. a. New Construction:Install 1-1/8" Techstyle Wall Channel (WT1) along perimeter, level, with bottom flange at finished ceiling height. See detail 1a. b. Install standard 15/16" T-Grid, level and square, per code standards. T-Grid must be installed at a height 11/8"above finished ceiling height (Flange of T-Grid should lay on top flange of wall channel for proper height). Fasten Tees to top of wall channel on proper centers (24" or 48") with pop rivet. T-Grid module to be 24" x 24" for 2x2Techstylepanel, 24" x 48" for 2x4 panel, and 48" x 48" for 4x4 panel. (Note: Recommend using standard double-web grid. Do not recommend using single-web grid, without flange cap). For other panel sizes, lay out grid to meet code requirements and finished panel size. See detail 1a.

Classic Series Installation Instructions

Products:
Techstyle Acoustical Solutions Classic Series (concealed)

Home | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.

Back to normal layout