Water Proofing / Crack Isolation

Merkrete™ Fracture-Guard 5000
CRACK ISOLATION MOLD RESISTANT MEMBRANE
Fracture-Guard 5000 is a one step mold resistant membrane composed of a modified latex elastomer that provides a monolithic surface. Its thin section (approx. 20 mils) and excellent elongation will inhibit the transferral of cracks from the substrate to the finished surface. The membrane is installed in a semi-fluid state and can be applied to any form or irregular shape (i.e. base flashings, parapets, walls, etc.).

Merkrete™ Fracture-Guard 5000®
used with Maxxon Underlayemnts
A one step mold resistant Crack Isolation membrane composed of a modified latex elastomer that produces a monolithic surface. Its thin section (approx. 30 mils) and excellent elongation will inhibit the transferral of cracks from the substrate to the finished surface. The membrane is installed in a semi-fluid state and can be applied to any form or irregular shape.

Merkrete™ HydroGuard One
ELASTOMERIC WATERPROOFING / ANTIFRACTURE MEMBRANE
Hydro-Guard One is a thin, load bearing membrane composed of a modified elastomeric copolymer. With excellent elongation properties and high strength, HydroGuard One provides a 100% waterproof membrane coating while limiting the transfer of substrate cracks to the finished overlay. The membrane is installed in a liquid state and can be applied to practically any form or irregular shape (i.e. base flashings, parapets, walls, etc.).

Merkrete™ Hydro-Guard 2000
INTERIOR and EXTERIOR WATERPROOF and CRACK ISOLATION MEMBRANE
Hydro-Guard 2000 is an asphalt modified latex membrane reinforced with a synthetic fabric and is applied in a cold, semi-fluid state. This thin, load bearing membrane is waterproof and will inhibit the transferral of cracks from the substrate to the finished surface.

Merkrete™ B.F.P.
EXTERIOR WATERPROOF and CRACK ISOLATION MEMBRANE
Merkrete BFP is a cold, liquid applied membrane reinforced with a synthetic fabric and protective covering. This thin, load bearing membrane provides positive waterproofing while inhibiting the transferral of cracks from the substrate to the finished surface. This membrane is used in conjunction with tile, stone quarry and porcelain products.

Merkrete 747® Exterior
Dual Membrane System
Merkrete Systems Dual Membrane System provides the specifier as well as the installer with the assurance of a watertight system by using two separate waterproofing systems.

Merkrete™ 300
WATERPROOF MEMBRANE SYSTEM
300 Waterproof membrane is a latex modified, fabric reinforced system formulated and prepackaged at the factory. Formulated with special latex compounds.

Merkrete™ 310
WATERPROOF MEMBRANE SYSTEM
310 Waterproof membrane is a latex modified system formulated and pre-packaged at the factory. It’s formulated with special latex compounds.