1842. CSI 3-Part Specifications.

1842AS SPEC 1842 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: Saddle Stop (1/4" x 3/4"), Pemko #1842AS

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone: (800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

.

HOUSING:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C

* [182AS Mill finish, 1842DS Dark bronze anodized,

1842GS Gold anodized].

SEAL:

Silicone Rubber, Extruded

* Federal Specification ZZ-R-755 Class 2A Grade 60 Type I & II

* -100 F. to +400 F.

4. TEST & CODE COMPLIANCE

Handicapped: Complies with CABO/ANSI A117.1-1992, ADA 1990,

and ADAAG 1991 Guidelines.

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2 Hours.

Listed and Labeled as Gasketing Materials.

Tested in accordance with UL10B by

Underwriters Laboratory, Inc. .

Smoke Label: Labeled as Gasketing for Smoke Control Doors.

Tested per NFPA 105 by Wyle Laboratories.

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Carefully trim to fit within the stops of frame opening. Trim

seal to 1/16" longer than trimmed saddle stop on each end. Press

against door to assure good seal, (do not over tighten -

installer should be able to slip business card between

seal and door). Fasten to threshold with #10 x 3/4" flat head

self tapping machine screws.

6. WARRANTY: Guaranteed by manufacturer against defects in

material or workmanship for 3 years.