254X4FG. CSI 3-Part Specifications.

254X4AFG SPEC 254X4FG Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: Thermal-Break Saddle w/Vinyl (1/2" x 8-1/8"),

Pemko #254X4AFG

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone: (800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

THRESHOLD:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C

* [254X4AFG Mill finish, 254X4DFG Dark bronze anodized,

254X4GFG Gold anodized].

Architectural bronze (brass), Extruded

* CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc,

0.05% alum.)

* [252X2BFG Mill finish, Oxidized & oil rubbed, Polished,

Satin brush]

VINYL THERMAL BREAK:

Vinyl, Rigid, Extruded Geon (Virgin material)

* Geon is a registered trade mark of the Geon Co.

* ASTM D1784-90 Class 16344

4. TEST & CODE COMPLIANCE:

Handicapped: Complies with CABO/ANSI A117.1-1992, ADA 1990;

and ADAAG 1991 guidelines.

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Carefully cope to fit within the frame opening. Fasten with

flat head wood or machine screws provided and appropriate

anchors as required. Use a sealant or compound at all edges

and joints.

6. WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for 3 years.