PEMKO  

RAMP11. CSI 3-Part Specifications.

RAMP11A RAMP11 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: Modular Ramp Component (1-1/2" to 2" x 6-1/4")

Pemko #RAMP11A

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone: (800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

NOTE: PEMKO STRONGLY RECOMMENDS PemKote SKID RESISTANT SURFACE FOR

ALL MODULAR RAMP THRESHOLD COMPONENTS. THIS RUGGED ABRASIVE FINISH

IS EXTREMELY SKID AND CORROSION RESISTANT AND CARRIES A 10-YEAR

GUARANTEE.

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C

* [RAMP11A Mill finish, RAMP11AK PemKote ].

4. TEST & CODE COMPLIANCE

Handicapped: Complies with CABO/ANSI A117.1-1992, ADA 1990; and

ADAAG 1991 guidelines.

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2 Hours.

Listed and Labeled as Gasketing Materials.

Tested in accordance with UL10B by

Underwriters Laboratory, Inc. .

 

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Refer to system specifications ASD001 through ASD006, Modular

Ramp Systems for installation of this product.

6. WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for 3 years.