|
355CS SPEC 355 Rev May 1995 SPECIFIER NOTE: THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE APPROPRIATE. CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT DOCUMENTS. 1. PRODUCT: Overlaping "T" Astragal with Silicone Seal (1/4" X 1-3/8"), Pemko #355CS 2. MANUFACTURER: PEMKO * Ventura PEMKO * Memphis 4226 Transport Street 5535 Distribution Drive Ventura, CA 93003 Memphis, TN 38141 Phone: (800) 283-9988 Phone (800) 824-3018 Fax: (800) 283-4050 Fax: (800) 243-3656 3. MATERIAL & FINISH: SPECIFIER NOTE: PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT, SELECT PARAGRAPH FOR MATERIAL YOU WANT. EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED. MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL ORDER. . HOUSING: Aluminum, Extruded * Alloy Type 6063-T5 * Chemical and physical properties per the Aluminum Assoc., Inc. * Federal Specification QQ-A-200/9C * [355CS Clear anodized, 355DS Dark bronze anodized, 355GS Gold anodized, 355BDGS Bright dip gold anodized, 355PWS Painted white].
Architectural bronze (brass), Extruded * CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc, 0.05% alum.) * [355BS Mill finish, Oxidized & oil rubbed, Polished, Satin brush] SEAL: Silicone Rubber, Extruded * Federal Specificatin ZZ-R-755 Class 2A Grade 60 Type I & II * -100 F. to +400 F. 4. TEST & CODE COMPLIANCE Fire Label: Classified By UL For Application To Swinging Type Fire Doors of the Hollow Metal or Steel Covered composite type Rated up to 3 Hours, or Wood Core Fire Doors rated up to 1-1/2 Hours. Listed and Labeled as Gasketing Materials. Tested in accordance with UL10B by Underwriters Laboratory, Inc. . . 5. INSTALLATION: Installation to be performed in strict accordance with manufacturer's instructions furnished with product. Trim to length and install on the meeting stile of the active leaf of a pair of outswinging doors with screws provided. (Note: For inswinging doors use Pemko No.352CR, see Pemko catalog).
6. WARRANTY: Guaranteed by manufacturer against defects in material or workmanship for 3 years. |