architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

About Resinous Flooring: Endüra Resin Chip System

Resinous Flooring: Endüra Resin Chip System

Endüra™ is a high performance Grade III resin flooringsystem designed to be used in garage floors, basement floors, workshopfloors, laundry room floors, locker room floors, restaurants, foodservice areas where return to service is extremely important. Thissystem combines the benefits of Epoxy resins and Polyaspartic technology.

Epoxy resins offer better wet-ability and adhesion to various substrateswhere as Polyaspartics offer very high abrasion resistance, hot-tirepick up resistance, UV stability and excellent chemical resistance.

endüra™ highperformance Grade III resin system

consistsof:

a. application of endüra E21—100% solids, pigmented
epoxy coating that is broadcasted with blended colored
resin chips

b.application ofendüra P70—clear Polyaspartic top coat

key benefits

  • Use of epoxy resins ensures superior wetting and excellent bonding to the substrates
  • Epoxy resin designed for moisture insensitive cure
  • Excellent abrasion—impact and hot tire pick-up resistance
  • Chemical resistance—resists chemicals like brake fluid, gasoline, mek, hydraulic oil, etc.
  • UV light stable—superb clarity top coat
  • Fast cure—return to service within hours after the application of the top coat
  • Zero VOC system

More chip colors are available...

detailedproduct information

important!: For successful installation of anyresinous flooring systems a concrete surface profile (CSP) of 4 to5 is recommended. If the installer is unable to achieve the CSP of4 or 5, application of primer, endüra E02, may be necessary.

endüra E02

It is a 100% solids, moisture tolerant epoxy primer for concreteand masonry surfaces. It combines the properties of water insensitivitywith good wetting properties. endüra E02 provides excellentfilling and sealing properties needed under high performance epoxyfloor coatings on concrete. The moisture tolerance of endüraE02 allows it to be applied to damp concrete after surface preparation.This includes bonding “old to old” or “new to old” concrete.

advantages

  • Low modulus – stress relieving
  • Fast cure formulation available for priming under coatings
  • Moisture insensitive cure
  • Conforms to ASTM C-881 requirements
  • Low viscosity-good wetting properties
TECHNICAL DATA CURE/DRY TIME
Viscosity @ 75°F 400 – 450cps Pot Life 30-40 minutes @
75°F
Mixing Ratio 2 parts A to 1 parts B by volume Dry to Touch 6–8 hours @ 75°F
 Solids Content 100% Solids by volume Re-Coat (regular cure) 10–12 hours @ 75°F
Volatile Organic Content 0 Re-Coat (fast cure) 4-6 hours @ 75°F
Gloss, 60°F Low sheen Full cure, maximum resistance 5 days
Weight Per gallon 9.00–9.50 pounds per gallon, mixed    

endüra E21

Endüra E21 is a 100% solids, pigmented epoxy floor coatingdesigned to provide high gloss, chemical resistant protection. Itis essentially odorless and can, therefore, be used in occupied areas.endüra E21 provides a smooth, high gloss finish or, in a heavybody form, an orange peel, texture finish. It can be broadcastedwith resin chips.

advantages

  • Low odor during application and cure
  • Zero VOC
  • Easy application and clean-up
TECHNICAL DATA CURE/DRY TIME
Viscosity @ 75°F 1500cps Pot Life 40 minutes @ 75°F
Mixing Ratio 4 parts A to 1 parts B by volume Dry to Touch 10–12 hours @ 75°F
 Solids Content 100% by volume Light Traffic 24 hours @ 75°F
Volatile Organic Content 0 Full cure, maximum resistance 5 days
Weight Per gallon 11.0 pounds per gallon, mixed    

endüra P70

Endüra P70 is a two component, ultra high solids, aliphaticPolyaspartic polyurea designed to provide high gloss, UV stable (non-yellowing)and chemical resistant protection. endüra P70 is a superior,new generation product exhibiting fast cure and excellent stain resistance.

endüra P70 has very low odor and can be applied indoors inoccupied areas. It is generally used as a clear, high gloss finishon eNdura high performance resin chip system.

ADVANTAGES

  • VOC compliant
  • Fast set times
  • Excellent UV resistance
  • Very high gloss
  • Excellent abrasion resistance
  • Chemical & stain resistance
  • Low odor; can be used in occupied areas
TECHNICAL DATA CURE/DRY TIME
Viscosity @ 75°F 350– 400cps Pot Life 20 minutes
Mixing Ratio 2 parts A to 1 parts B by volume Dry to Touch 2.5 hours @ 75°F
 Solids Content 95%–97% by volume
Re-Coat 4 hours @ 75°F
Volatile Organic Content 35.8 gm/L Light Traffic 4-5 hours @ 75°F
Weight Per gallon 8.77 pounds per gallon, mixed Heavy Traffic 48 hours
Tensile strength
ASTM D412
3000–4000    
Hardness Shore D 24hr 25–35    

Brochures | 3-Part CSI specifications

Brochures for Resinous Flooring: Endüra Resin Chip System

Brochures for Resinous Flooring: Endüra Resin Chip System
Preview Description Format Size Open
Duraamen Company Brochure
Duraamen Company Brochure
PDF 3.9 MB Open
Color Charts
Color Charts for Acid Stains, Water Based Stains, Dyes, Metallic Epoxy Flooring, Garage Floor Coatings, Concrete Coloring and Seamless Resinous Flooring.
    Open
Endüra Brochure
High Performance Grade III Resin Chip System
PDF 959 kB Open
Video Gallery
Training & Creative Inspiration Videos
    Open

3-Part CSI specifications for Resinous Flooring: Endüra Resin Chip System

3-Part CSI specifications for Resinous Flooring: Endüra Resin Chip System
Description Format Size Download
Technical Data Sheets
Architects Corner
    Download


Request for Information / Request a Catalog from Duraamen Engineered Products Inc. about Resinous Flooring: Endüra Resin Chip System
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     


News archive:
Concrete is Tough. Polyaspartic Coatings are Tougher. Get your FREE Samples Now! (Oct 8, 2015)