architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

Gold Bond Gypsum Board and Plaster Products

 

Gold Bond Gypsum Board and Plaster Products

Gold Bond® Gypsum Board
Gold Bond® Gypsum Board consists of a fire-resistant gypsum core encased in a heavy, natural finish with 100-percent recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are cut square and finished smooth.

Gold Bond® High Strength LITE® Gypsum Board
Gold Bond® High Strength LITE® Gypsum Board consists of a fire-resistant gypsum core with a heavy, natural finish and 100-percent recycled paper on the face and back sides. It is formulated to be 25 percent lighter in weight than Gold Bond® 1/2 in. (12.7 mm) Gypsum Board. The result is a superior board that is both sag resistant and easier to handle. The face paper is folded around the long edges to reinforce and protect the core, and the ends are cut square and finished smooth.

Gold Bond® High Strength Ceiling Board
Gold Bond® High Strength Ceiling Board is a specialty gypsum board encased in 100% recycled paper. The increased uniformity and integrity of its gypsum core makes the sag resistance equivalent to 5/8 in. (15.9 mm) Type X Gypsum Board.

Gold Bond® ThermalFOIL® Gypsum Board
Gold Bond® ThermalFOIL® Gypsum Board consists of a fire-resistant gypsum core encased in a heavy, natural finish with 100% recycled paper on the face side and a perforated foil backing. When combined with closed-cell spray polyurethane foam insulation and a defined air space, it acts as part of a reflective insulated air space, complying with 2012 and 2015 IECC codes.

Gold Bond® Fire-Shield® Gypsum Board
Gold Bond® Fire-Shield® Gypsum Board consists of a fire-resistant gypsum core with a heavy, natural finish and 100% recycled paper on the face and back sides. The face paper folds around the long edges to reinforce and protect the core, and the ends are cut square and finished smooth.

Gold Bond® High Strength Fire-Shield® 30 Gypsum Board
Gold Bond® High Strength Fire-Shield® 30 Gypsum Board consists of a fire-resistant, non-Type X gypsum core with a heavy, natural finish and 100% recycled paper on the face and back sides. It is specially formulated to be 30 percent lighter in weight than standard Type X Gypsum Board. The face paper is folded around the long edges to reinforce and protect the core, and the ends are cut square and finished smooth.

Gold Bond® 3/4" Ultra-Shield FS® Gypsum Board
Gold Bond® 3/4" Ultra-Shield FS Gypsum Board consists of a fire-resistant gypsum core with a heavy, natural finish and 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are cut square and finished smooth.

Gold Bond® Foil Back Gypsum Board
Gold Bond® Foil Back Gypsum Board consists of a fire-resistant gypsum core with a heavy, natural finish and 100% recycled paper on the face and a strong liner paper on the back side. A Type III aluminum foil vapor retarder, laminated to the back surface, is designed to prevent condensation from occurring within the wall cavity.

Gold Bond® BRAND High Flex® Gypsum Board
Use Gold Bond® brand High Flex® for interior, non-fire-rated wall and ceiling applications. High Flex® is ideal for concave and convex surfaces, such as walls, arches and vaulted ceilings. Apply it in double layers. This gypsum board consists of a fire-resistant gypsum core encased in a heavy, natural finish with 100-percent recycled paper on the face and back sides.

Gold Bond® Durasan® Prefinshed Gyspum Board
Gold Bond® Durasan® Prefinished Gypsum Board consists of a fire-resistant gypsum core in a heavy, natural finish with 100% recycled paper on the face and back sides and anadditional vinyl covering on the panel. The long edges of all Durasan® Prefinished Gypsum Board are beveled and wrapped with decorative vinyl.

Gold Bond® Gypsum Sheathing
Gold Bond® Gypsum Sheathing is a moisture-resistant sheathing installed on the outside of exterior framing as a substrate for exterior claddings. It is manufactured with a treated water-resistant core and faced with moisture-resistant paper on both faces and on both long edges.

Gold Bond® Fire-Shield® Shaftliner
Gold Bond® Fire-Shield® Shaftliner consists of a fire-resistant Type X gypsum core encased in green, heavy, moisture-resistant paper that is 100% recycled on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are cut square and finished smooth.

Gold Bond® Gridstone® Ceiling Panels
Gold Bond® Gridstone® Gypsum Ceiling Panels consist of a 1/2 in. (12.7 mm) non-combustible, Fire-Shield® G Gypsum Core with a 2-mil white, stipple-textured vinyl laminate face that combines high light reflectance with easy cleanability.

Gold Bond® Gridstone® CleanRoom Ceiling Panels
Gold Bond® Gridstone® CleanRoom Gypsum Ceiling Panels consist of a non-combustible, 1/2 in. (12.7 mm) Fire-Shield® G Gypsum Core with a 2-mil white, stipple-textured vinyl laminate face that combines high light reflectance with easy cleanability and a clear vinyl laminate back. Gridstone® CleanRoom Gypsum Ceiling Panels are manufactured with the exposed edges sealed, providing a durable coating that completely seals the panel.

Gold Bond® Gridstone® Hi-Strength Ceiling Panels
Gold Bond® Gridstone® Hi-Strength Gypsum Ceiling Panels consist of a 5/16 in. (7.9 mm) non-combustible gypsum core with a 2-mil white, stipple-textured vinyl laminate face that combines high light reflectance with easy cleanability. The high strength gypsum core is formulated with increased uniformity and integrity that increases its sag resistance.

Gold Bond® Kal-Kore® Plaster Base
Gold Bond® Kal-Kore® Plaster Base is a tapered-edge gypsum plaster base with 100% recycled gray absorptive face paper surface designed to permit rapid trowel application of Kal-Kote® Basecoat, Uni-Kal® and X-KALibur® one-coat plasters.

Gold Bond® Conventional Plaster
Apply as two-coat systems (base or scratch and finish) or three-coat systems (scratch, brown and finish) over gypsum plaster base or expanded metal lath.

Gold Bond® Veneer Plaster
Veneer plaster systems utilize thinly troweled, special-purpose plasters applied to Kal-Kore® Plaster Base or applied directly to bonded masonry or bonded concrete substrates.

@NationalGypsum #NationalGypsum #construct #Gypsum #Walls #Ceilings #GoldBond

For other relevant searches, you might want to try:

(09250) Gypsum Board
(15810) Duct
(02 85 00) Mold Remediation
(07 21 00) Thermal Insulation
(07 84 00) Firestopping
(09 01 50) Maintenance of Ceilings
(09 06 50) Schedules for Ceilings
(09 21 00) Plaster and Gypsum Board Assemblies
(09 29 00) Gypsum Board
(09 50 00) Ceilings
(09 51 00) Acoustical Ceilings
(09 51 13) Acoustical Panel Ceilings
(09 51 14) Acoustical Fabric-Faced Panel Ceilings
(09 51 23) Acoustical Tile Ceilings
(09 51 26) Acoustical Wood Ceilings
(09 51 33) Acoustical Metal Pan Ceilings
(09 51 53) Direct-Applied Acoustical Ceilings
(09 53 00) Acoustical Ceiling Suspension Assemblies
(09 53 13) Curved Profile Ceiling Suspension Assemblies
(09 53 23) Metal Acoustical Ceiling Suspension Assemblies
  (09 53 33) Plastic Acoustical Ceiling Suspension Assemblies
(09 54 00) Specialty Ceilings
(09 54 13) Open Metal Mesh Ceilings
(09 54 16) Luminous Ceilings
(09 54 19) Mirror Panel Ceilings
(09 56 00) Textured Ceilings
(09 57 00) Special Function Ceilings
(09 58 00) Integrated Ceiling Assemblies
(09 84 00) Acoustic Room Components
(10 21 00) Compartments and Cubicles
(11 30 00) Residential Equipment
(11 34 00) Residential Ceiling Fans
(13 20 00) Special Purpose Rooms
(23 30 00) HVAC Air Distribution
(23 35 00) Special Exhaust Systems
(31 68 00) Foundation Anchors
(32 90 00) Planting
(32 91 00) Planting Preparation
(32 93 00) Plants
(32 96 00) Transplanting