architecture - engineering - construction
AECinfo.com

About ci Systems

3-Part CSI specifications  

ci Systems

The world-class building-science experts at Sto continue to lead the way in advancing energy efficiency, durability and aesthetic appeal. Today’s energy codes and regulations reflect many of the design principles embodied in our Continuous Insulation (ci) Systems, and the proven performance of Sto’s next-generation EIFS appeals to designers, contractors and owners alike.

StoTherm® ci Wall Systems (EIFS)

Integrated Wall Systems that deliver the best in performance, sustainability and design flexibility.

Sto’s next-generation StoTherm® ci systems integrate the following key elements: continuous insulation (ci), an air/moisture  barrier, drainage and a variety of textured finish options to create a superior, sustainable wall cladding. This high-performing, eye-catching system saves energy and stays attractive for years. StoTherm® ci improves indoor comfort and air quality while maintaining maximum curb appeal and lowering overall life-cycle costs. 

System Features

  • Waterproof Air Barrier
    Protects the wall from moisture intrusion minimizing risk of water damage and associated repair costs.
  • High R-Value
    Continuous insulation with high R-values provides significant energy cost savings by eliminating thermal bridging.
  • Code Approved
    Complies with both ICC and IECC code requirements for continuous insulation.
  • Outbound Dew Point
    Prevents condensation and freeze damage by placing the dew point outside the stud wall cavity.
  • Reduced Structural Loads
    StoTherm® claddings are very lightweight, resulting in reduced structural cost requirements.
  • No Mechanical Fasteners
    No penetrating nails or screws to attach the insulation means no thermal bridging.
  • Low Maintenance Cost
    Coatings and finishes with advanced acrylic and Lotus-Effect technologies resist dirt pickup, peeling and cracking.
  • Lowest Life-Cycle Cost
    StoTherm® ci claddings have the lowest life cycle costs compared to non-insulated brick and stucco claddings.
  • Premium Finishes & Coatings
    Sto high performance finishes and coatings provide superior weatherability and resistance to UV fading, mold and mildew.

StoTherm® ci

Superior energy savings, design freedom and versatility.

StoTherm® ci is a high-performance, exterior-wall cladding system that integrates a seamless air and moisture barrier with continuous insulation (ci) and advanced drainage capabilities. The result: excellent protection against moisture intrusion, as well as substantial energy savings thanks to a thermally efficient building envelope that enhances interior climate control and comfort. StoTherm® ci System works in any climate and in full compliance with today’s energy and building codes.  And because what covers the outside is just as important as the advanced elements inside, StoTherm® ci also provides a wide range of protective and decorative finish options to distinguish your project.

StoTherm® ci Lotusan®

StoTherm® ci Lotusan® is a high-performance, energy efficient wall cladding that integrates several proven components – StoGuard®, waterproof air barrier, StoTherm® insulated cladding and drainage, and StoLit® Lotusan®, a textured finish with self-cleaning properties.

StoTherm® ci Classic

StoTherm® ci Classic combines the features of Sto’s most popular continuous insulation system, StoTherm® and the StoGuard® waterproof air barrier system for greater energy efficiency and protection against moisture intrusion.

StoTherm® ci Essence

StoTherm® ci Essence combines the affordable quality of StoTherm® technology with StoGuard® waterproof air barrier for enhanced energy efficiency and protection against moisture intrusion.

StoTherm® ci XPS

Durable, high performance, continuous insulation wall system.

A fully-tested system providing superior air and weather tightness, excellent long-lasting thermal performance and durability, incorporating StoGuard® liquid-applied air and moisture barrier and Dow Styrofoam™ Panel Core 20 Insulation. This sustainable, high-performance wall system helps lower energy costs and reduces the carbon footprint of buildings. In addition, StoTherm® ci XPS offers unmatched aesthetic choices thanks to a wide range of decorative and protective finishes available in virtually unlimited colors.

StoTherm® ci XPS Lotusan®

StoTherm® ci XPS Lotusan® is a fully-tested system providing superior air and weather tightness, excellent long-lasting thermal performance and durability.
StoTherm® ci XPS Lotusan® combines StoGuard® liquid-applied air and moisture barrier with Dow STYROFOAM™ Panel Core 20 insulation, and Stolit® Lotusan®, a unique textured finish with self-cleaning properties.

StoTherm® ci XPS Classic

StoTherm® ci XPS Classic is a fully-tested system providing superior air and weather tightness, excellent long-lasting thermal performance and durability.
StoTherm® ci XPS Classic combines StoGuard® liquid-applied air and moisture barrier with Dow STYROFOAM™ Panel Core 20 insulation, and Stolit® textured finishes.

StoTherm® ci XPS Essence

StoTherm® ci XPS Essence is a fully-tested system providing air and weather tightness, and long-lasting thermal performance and durability.
StoTherm® ci XPS Essence incorporates StoGuard® air and moisture barrier and Dow STYROFOAM™ Panel Core 20 insulation. This system is available with Sto Essence textured finishes.

StoTherm® ci Accessories

Sto Mesh Corner Bead Standard

Sto Mesh Corner Bead Standard provides a solution to create true and straight corners which are resistant to chipping and cracking in StoTherm ci wall systems.

The Sto accessory is made of an angled strip of mesh (90° angle) reinforced with a plastic rail, providing a cost-effective and easy-to-apply alternative to the process of wrapping building corners with mesh reinforcement layers.

Sto Mesh Corner Bead Standard is compatible with all Sto basecoat products and provides strength and protection against everyday knocks, enhancing the long-term durability of the façade.

Sto Drip Edge Profile

Sto Drip Edge Profile is a PVC accessory with integral reinforcing mesh that creates a drip edge and plaster return in Sto’s two wall systems.  Its intent is to control the direction of dripping water and help protect the building enclosure from moisture intrusion in vulnerable areas such as fascia returns, balcony undersides and other projecting building elements.

Sto Drip Edge Profile is easy to apply, eliminating labor and costs associated with cutting of drip reveals in foam insulation.  The accessory also provides additional crack resistance with its integral mesh reinforcement and helps achieve straighter, cleaner lines at plaster returns.

3-Part CSI specifications for ci Systems

3-Part CSI specifications for ci Systems
Description Format Size Download
Specifications
Specialty Systems, reStore, Air and Moisture Barriers, Coatings, Backup Wall System, Stucco Systems, Cement Board Stucco Systems, Continuous Insulation Systems
  504 kB Download


Request for Information / Request a Catalog from Sto Corp. about ci Systems
 
(Please check companies and/or products above.)
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     


News archive:
Case Study: Sustainable and Energy-Efficient Mixed-Use Features Contemporary Design (Oct 10, 2022)
Case Study: Replacing a Faltering Porcelain Facade with StoTherm ci (Dec 21, 2021)

07 24 00 - Exterior Insulation and Finish Systems