| |
Islander COLONIAL HINGED SHUTTERS
Expertly designed and engineered to meet the rigid requirements of the South Florida Building Code, the attractive ISLANDER Colonial Hinged Shutter provides the durability to withstand hurricane wind forces. Installed beside windows, ISLANDER Colonial Hinged Shutters swing to close and can be locked to discourage unauthorized entry and vandalism. Available in single and double shutters. See "Willard Aluminum Colors/Properties" Showcase for ISLANDER color chart.
Islander DECORATOR SHUTTERS
Willard offers the finest high quality aluminum Islander Ornamental Shutters with real louvers. Finished with a low gloss paint, this attractive non-functional fixed shutter eliminates costly maintenance problems such as warping, rotting and frequent refinishing¿ it looks exactly like wood.
Shipped complete with hardware, they are available with tabs on top and bottom or holes in corners for easy installation.
Islander COLONIAL HINGED SHUTTER
SPECIFICATIONS
GENERAL
Hinged shutters, as installed beside windows where indicated and as detailed on the drawings, shall be the all-aluminum islander, as manufactured by Willard Shutter Co, Inc., Miami, Florida.
CONSTRUCTION
Shutters shall consist of a series of 1-3/4" wide fixed louvers inserted into interlocking box-beam frames, 1-5/8" thick and 2-1/2" wide.
Louvers shall be rolled with a converse beveled edge and spaced in 1-1/4" height increments. Louvers may span a maximum 26", at which point an additional box-beam shall be required as an interior frame support (mull).
Each box-beam shall be packed with styrofoam to firmly receive the louver and add structural soundness to the frame. Heavy duty extruded aluminum I-beams shall be inserted into box-beams for additional reinforcement as required.
OPERATION
Hinged shutters shall be mounted on aluminum hinged hardware to swing closed and lock securely by means of an aluminum horizontal lock bar. Shutters shall be held back in the open position with a nickel plated brass friction catch device.
MATERIALS
Box-beam and louvers shall be 3004-H36 roll-formed aluminum, .025" thick.
Styrofoam shall be dyplast expanded polystyrene insulation to meet federal specifications HH-1-524a.
I-beam inserts shall be 6063-T6 extruded aluminum, .062" typical wall thickness.
All fasteners shall be self-tapping stainless steel machine screws or pop-rivets, aluminum alloy 2024-T4.
FINISH
Box-beam frame and louvers shall be roller-coated baked enamel in a medium gloss as selected from manufacturer¿s standard colors. (special finishes available subject to inquiry.) I-beams shall be mill finish. All other aluminum extrusions shall be anodized R1-201.
Islander DECORATOR SHUTTER
SPECIFICATIONS
GENERAL
Non-functional ornamental shutters, as installed beside windows where indicated and as detailed on the drawings, shall be the all-aluminum islander, as manufactured by Willard Shutter Co, Inc., Miami, Florida.
CONSTRUCTION
Shutters shall consist of a series of 1-3/4" wide fixed louvers inserted into interlocking box-beam frames, 1-5/8" thick and 2-1/2" wide.
Louvers shall be rolled with a converse beveled edge and spaced in 1-1/4" height increments. Louvers may span a maximum 26", at which point an additional box-beam shall be required as an interior frame support (mull).
Each box-beam shall be packed with styrofoam to firmly receive the louver and add structural soundness to the frame. Heavy duty extruded aluminum I-beams shall be inserted into box-beams for additional reinforcement as required.
OPERATION
Non-functional ornamental shutters shall be mounted in a fixed position secured by appropriate hardware through the top and bottom tie-downs or center holes in each corner of the shutters.
MATERIALS
Box-beam and louvers shall be 3004-H36 roll-formed aluminum, .025" thick.
Styrofoam shall be dyplast expanded polystyrene insulation to meet federal specifications HH-1-524a.
I-beam inserts shall be 6063-T6 extruded aluminum, .062" typical wall thickness.
All fasteners shall be self-tapping stainless steel machine screws or pop-rivets, aluminum alloy 2024-T4.
Aluminum extrusions shall be alloy 6063-T5.
FINISH
Box-beam frame and louvers shall be roller-coated baked enamel in a medium gloss as selected from manufacturer¿s standard colors. (special finishes available subject to inquiry.) I-beam shall be mill finish. All other aluminum extrusions shall be anodized R1-201.
URL: http://www.willardshutterco.com/bahama.html
06 49 19 - Exterior Wood Shutters
08 51 66 - Metal Window Screens
10 71 16 - Storm Panels
10 82 00 - Grilles and Screens
10240 - Grilles and Screen
10715 - Storm Panel
Copyright © 1996–2008 AECinfo.com – Product presentation: information, news and documentation about Willard Hinged/Fixed Shutters.
|
