E-Z HatchEZ Hatch Attic Access Door
EZ Hatch Attic Access Door - R-42 and R-50
INSTALLS IN MINUTES INTO A 22-5/8" x 30-1/2" ROUGH OPENING!!
The EZ Hatch Attic Access Door Panel Hatch System is an easy to install, easy to use, highly insulated door, panel, hatch system that installs in minutes and provides an air sealed, professional, high-quality, insulated access opening into the attic space.
Triple gaskets provide an air tight seal! The core of the door is 10" thick and made of Expanded Polystyrene foam that provides a greater R-Value per inch than fiberglass. The face of the door is gloss white, durable, and easy to clean.
For new construction and renovation - an alternative to energy-wasting pull down attic stairs!
Deluxe model with 4-point keyed lock and recessed handles - designed for security and knee walls. Additional shipping required to AK & Canada.
Battic Door was profiled by Builder magazine at the 2013 NAHB International Builders Show
Watch our How To Install E-Z Hatch video
A Message From Mark Tyrol, President of Battic Door:
Due to the recent IRC and IECC Code changes it may be difficult for Architects, Builders, Contractors, Remodelers, etc. to select an attic access solution for residential use that meets the new Building and Energy Codes:
2009 IECC Section 402.2.3 and 2009 IRC Section N1102.2.3 and 2012 IECC Section R402.2.4 reads: "Access hatches and doors. Access doors from conditioned spaces to unconditioned spaces (e.g., attics and crawl spaces) shall be weatherstripped and insulated to a level equivalent to the insulation on the surrounding surfaces." Energy Star Version 3 requirements conform with the 2009, 2012 IECC and 2009, 2012 IRC. The 2012 International Green Construction Code conforms to the 2012 IECC.
These Code requirements mean the attic access pull down ladder or access hatch must now be insulated to the same level as the rest of the attic (minimum R-30).
The E-Z Hatch is your attic access solution that meets these new Codes. It is a high performance attic access hatch that is an alternative to energy wasting pull down ladders. It provides an air-sealed attic access that helps to increase your blower door test results.
It is important to note that R-5, R-10 attic ladders Do Not Meet Code - they must be insulated to minimum of R-30.
If your project includes pull down ladders see our Battic Door R-50 Attic Stair Cover kits. Thank you.
For other relevant searches, you might want to try: